Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR4-2400 CL17 DIMM validated for Biostar B250ET2, B250GTN and TB250-BTC motherboards
This 16 GB DDR4 module is built for Biostar B250ET2, B250GTN and TB250-BTC motherboards. It runs at 2400 MHz with CL17 timing at 1.2 V. The unbuffered, non-ECC DIMM uses a 2Rx8 layout on a 288-pin PCB. Computer Memory Solutions validates compatibility for these three boards.
Adding this stick doubles capacity on a board limited to 32 GB across two sockets. The upgrade is worthwhile when the current kit leaves a free slot or when the existing modules are slower than 2400 MHz. Buyers who need more than 32 GB total cannot use this platform.
The memory controller tops out at 2400 MHz, so faster DDR4 modules will downclock to this speed. Only two DIMM sockets exist, capping the system at 32 GB. Builders who require four slots or speeds above 2400 MHz must choose a different motherboard.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM2048642400DIMM |
| Total capacity | 16 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| Memory timings | 17-17-17 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Biostar B250ET2, B250GTN, TB250-BTC Motherboards |
| In the box | |
| Included items | 1Memory Ram Stick |
Yes. The module is a 288-pin DDR4 DIMM and the board provides two DDR4 DIMM sockets supporting up to 32 GB total.
Align the notch on the module with the key in the socket, press down firmly until both side clips click into place, and verify the stick sits evenly.
No. The DIMM runs at the standard 1.2 V DDR4 voltage and is unbuffered non-ECC, so the board detects it automatically without BIOS changes.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?