We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR4 DIMM sticks with black chips in anti-static tray

Computer Memory Solutions

Computer Memory Solutions 2×16GB DDR4 3200 CL16 1.35V Non-ECC DIMM memory upgrade

SKU CH-YJDE-TYEAM

A 32 GB kit of two 16 GB DDR4 DIMMs running at 3200 MHz with CL16 timing and 1.35 V operation

  • Total capacity16 GB
  • Rated speedDDR4 3200 (PC4 25600)
  • ChipsetMajor Brand Chipset
  • CAS latency16
  • Memory timings16-18-18
  • Rated voltage1.35 V
  • 32 GB total capacity for demanding workloads
  • 3200 MHz DDR4 speed with CL16 latency
  • 35 V operation reduces power draw
  • 288-pin unbuffered non-ECC DIMM form factor
  • Matched 2×16 GB kit enables dual-channel performance

32 GB DDR4 kit for desktop upgrades

This 32 GB kit contains two 16 GB DDR4 DIMMs rated at 3200 MHz with CL16 timing. It is built for desktop owners who need more capacity for multitasking or content creation and whose systems accept standard 288-pin unbuffered non-ECC modules. The 1.35 V operating voltage matches the DDR4 JEDEC range used by many mainstream platforms.

Steady throughput at rated speed

Running at the specified 3200 MHz and 16-18-18 timings, the modules maintain their rated data rate during extended workloads such as rendering or large dataset processing. Because all installed memory operates at the speed of the slowest module, pairing these sticks together avoids the down-clocking that occurs when mixing different kits. A 64-bit operating system is required to address the full 32 GB capacity.

Standard 288-pin DIMM construction

Each stick uses a conventional 288-pin DIMM form factor with major-brand memory chips mounted on an unbuffered PCB. The non-ECC, unbuffered design fits typical consumer desktop slots without requiring registered or server-class motherboards. Visual appearance may vary from the product image, but the electrical specification remains consistent across the kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $172.99
Cheaper than about 60% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB
Lower than about 70% of the 20,941 comparable items (median 32 GB).
CAS latency 16
Lower than about 80% of the 483 comparable items (median 22).
Price per GB $10.81 per GB
Pricier than about 55% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Part numberCM2048643200DIMM
Total capacity16 GB
Performance
Rated speedDDR4 3200 (PC4 25600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latency16
Memory timings16-18-18
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Power
Rated voltage1.35 V

Questions about this item

Does the 1.35 V operating voltage keep the modules cool during continuous use?

The kit runs at 1.35 V, which is the standard DDR4 voltage, so heat output stays within normal limits for all‑day operation.

What motherboard slot and CPU architecture are required to use this 288‑pin DDR4 kit?

You need a desktop board with 288‑pin DDR4 DIMM slots and a 64‑bit operating system to address the full 32 GB capacity.

Will all installed memory run at the speed of the slowest module when this kit is mixed with existing DIMMs?

Yes, the system will operate at the lowest speed among all populated slots, so adding these 3200 MHz sticks to slower modules reduces overall memory frequency.

More in Model-Specific Memory Upgrades

Similar items