We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 2GB DDR3 1333MHz CL7 1.5V SO-DIMM for Acer Revo RC111-ER10H memory upgrade

SKU CH-KTE8-D813Y

2GB DDR3 1333MHz CL7 SO-DIMM module validated for the Acer Revo RC111-ER10H desktop

  • Total capacity2 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL7
  • Memory timings7-7-7
  • Rated voltage1.5 V
  • 2GB capacity for Acer Revo RC111-ER10H upgrade
  • 1333MHz DDR3 speed with CL7 latency
  • 5V low-voltage operation reduces power draw
  • 204-pin SO-DIMM fits the system slot
  • Single 2GB module uses one of two sockets

2GB DDR3 SO-DIMM for Acer Revo RC111-ER10H

This 2GB DDR3 SO-DIMM module is built specifically for the Acer Revo RC111-ER10H desktop. It provides a single 204-pin stick rated at 1333MHz with CL7 timings and 1.5V operation. The unbuffered, non-ECC design matches the system's original memory architecture. It suits owners of this compact desktop who need a direct replacement or a simple capacity increase.

DDR3 1333MHz SO-DIMM practical limits

The DDR3 1333 (PC3-10600) interface caps data transfer at the standard bus rate for this generation. This module runs at CL7 latency, which is tighter than the CL9 alternative sometimes listed for the same platform. The system board accepts a maximum of 8GB across its two sockets, so this 2GB stick leaves room for further expansion. Voltage is fixed at 1.5V with no heat spreader fitted.

Check your Revo RC111-ER10H before ordering

Verify that your unit is the exact Acer Revo RC111-ER10H desktop model before purchase. Confirm the board has a free 204-pin SO-DIMM slot; the system provides two sockets in total. Ensure the BIOS is up to date so it recognises the 1Rx8 rank configuration correctly. This module is not suitable for laptops, full-size DIMM slots, or any system requiring ECC or registered memory.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $9.99
Cheaper than about 97% of the 21,161 comparable items (median $397.99).
Total capacity 2 GB
Lower than about 95% of the 20,941 comparable items (median 32 GB).
Price per GB $5.00 per GB
Cheaper than about 77% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM2566410600SOSRH
Total capacity2 GB
Product type204-Pin DDR3 SO-DIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL7
Memory timings7-7-7
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsAcer Revo Rc111-Er10H Desktop
In the box
Included items1 Memory RAM Stick

Questions about this item

Should I buy the single 2GB module or look for a 4GB kit for my Acer Revo RC111-ER10H?

This listing is a single 2GB stick. Your system has two sockets and supports up to 8GB total, so you can add a second module later to reach 4GB or fill both slots for the maximum capacity.

Will the CL7 timing at 1333MHz actually run at that speed in my Revo desktop?

The module is rated for DDR3 1333 (PC3 10600) with CL7 7-7-7 timing. The Revo RC111-ER10H will run it at the highest speed the platform supports, which may be 1333MHz or a lower supported frequency.

Is the 204-pin DDR3 SO-DIMM interface the right fit for the RC111-ER10H motherboard?

Yes. This is a 204-pin DDR3 SO-DIMM, which matches the socket type used in the Acer Revo RC111-ER10H. The unbuffered, non-ECC design with 1.5V voltage is the standard specification for this system.

More in Model-Specific Memory Upgrades

Similar items