Computer Memory Solutions 2x32GB DDR5-5600 CL36 262-pin SO-DIMM memory upgrade

System-specific DDR5 SO-DIMM kit

This kit provides two 32 GB modules for a total of 64 GB of DDR5-5600 memory. It is built for laptops or small-form-factor systems that accept 262-pin SO-DIMMs and operate at 1.1 V. The unbuffered, non-ECC design suits standard consumer platforms rather than server or workstation boards requiring registered memory.

Straightforward SO-DIMM installation

Each module inserts into a standard 262-pin slot with a keyed notch that prevents backward insertion. Because the kit is unbuffered and runs at the JEDEC 1.1 V baseline, no manual voltage or timing changes are needed in most BIOS versions. Mixing these sticks with existing memory of a different speed or latency will force the entire array to run at the slowest module’s settings, so matched-pair installation is advised for consistent operation.

Steady throughput at rated timings

The modules operate at 5600 MT/s with timings of 30-36-36-76 and a CAS latency of 36 under the standard 1.1 V supply. This JEDEC-compliant profile is sustained during extended workloads without requiring enthusiast voltage overrides or active cooling. Systems limited to lower memory speeds by the processor or chipset will automatically downclock the kit, so peak bandwidth depends on the host platform’s supported data rate.