We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 32GB (2×16GB) DDR4 2666MHz CL19 288-pin DIMM Dell 3671 Fujitsu D588/T

SKU CH-FA28-HZKFS

32 GB DDR4 kit with two 16 GB unbuffered DIMMs at 2666 MHz CL19 for Dell Inspiron 3671 and Fujitsu ESPRIMO D588/T desktops

  • Total capacity32 GB (2 × 16 GB)
  • Rated speedDDR4 2666 (PC4 21300)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL19
  • Memory timings19-19-19
  • Rated voltage1.2 V
  • 32 GB total capacity from two 16 GB modules
  • 2666 MHz DDR4 speed rated at PC4-21300
  • CL19 latency with 19-19-19 timing at 1.20 V
  • Unbuffered non-ECC 288-pin DIMM for desktop systems
  • Guaranteed compatible with Dell Inspiron 3671 and Fujitsu ESPRIMO D588/T

Dell Inspiron 3671 & Fujitsu D588/T upgrade kit

This 32 GB kit contains two 16 GB DDR4 modules built for the Dell Inspiron 3671 desktop and the Fujitsu ESPRIMO D588/T. Each stick is a 288‑pin unbuffered DIMM rated at 2666 MHz with CL19 timings and 1.20 V operation. The kit fills both memory slots in those systems.

Steady throughput at rated speed

The modules run at their specified 2666 MHz without overclocking, so sustained workloads such as large dataset processing or extended rendering sessions stay within the validated voltage and timing envelope. All installed memory will operate at the slowest module speed present, so mixing with slower sticks reduces overall throughput.

Verify slot count and maximum capacity

The target platforms provide two DIMM sockets and a 32 GB ceiling, so this kit occupies every available slot. Confirm your motherboard revision matches the listed models before ordering, as other Dell or Fujitsu chassis may have different slot layouts or lower limits.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $153.99
Cheaper than about 61% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (2 × 16 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $4.81 per GB
Cheaper than about 79% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM2048642666DIMM
Total capacity32 GB (2 × 16 GB)
Product type288-Pin DDR4 SDRAM
Performance
Rated speedDDR4 2666 (PC4 21300)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL19
Memory timings19-19-19
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell Inspiron 3671 Desktop, Fujitsu ESPRIMO D588/T
In the box
Included items2 Memory RAM Sticks

Questions about this item

How much power do the 1.20 V DDR4 modules draw when the system runs continuously?

Each 16 GB stick operates at the standard 1.20 V DDR4 voltage, keeping power draw low during all-day workloads.

What motherboard slot and CPU memory controller are required for this 288-pin kit to function?

The kit needs a desktop board with two 288-pin DDR4 slots and a CPU that supports 2666 MHz DDR4, as found in the Dell Inspiron 3671 and Fujitsu ESPRIMO D588/T.

If I keep one existing 16 GB DDR4 stick and add this 2×16 GB kit, what speed will all three modules run at?

All memory will drop to the slowest installed module or the CPU's maximum supported speed, so the 2666 MHz kit will downclock to match the older stick.

More in Model-Specific Memory Upgrades

Similar items