We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR3 DIMM modules with gold contacts

Computer Memory Solutions

Computer Memory Solutions 32GB (4x8GB) DDR3 1600 ECC Non-Registered DIMM Kit - B90

SKU CH-WEKE-XPBE2

A 32 GB kit of four 8 GB DDR3 1600 ECC unregistered DIMMs validated for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F server boards

  • Total capacity32 GB (4 × 8 GB)
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Memory timings11-11-11
  • Rated voltage1.5 V
  • 32 GB capacity across four 8 GB modules for server workloads
  • ECC protection detects and corrects single-bit errors for data integrity
  • DDR3 1600 speed rated at PC3 12800 for responsive performance
  • CL11 latency at 1.5 V for stable operation
  • Validated for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards

Server Memory Kit

This 32GB kit contains four 8GB DDR3 modules built for Supermicro X10SLL-F, X10SLL+-F and X10SLH-F motherboards. It targets administrators upgrading compatible servers with ECC protection. The unregistered DIMMs install directly into the board's 240-pin slots. Buyers needing registered memory or a different DDR generation cannot use this kit.

DDR3 1600 ECC Specification

The modules run at 1600MHz with a PC3 12800 rating and CL11 11-11-11 timings at 1.5V. ECC non-registered operation is the single specification that determines compatibility with the listed Supermicro platforms. A different speed, voltage or buffering type will not work in these systems.

Thermals and Power

Each DIMM operates at the standard 1.5V DDR3 voltage without a heat spreader unless current inventory includes one. Power draw stays within normal DDR3 limits for 8GB unbuffered modules. No active cooling is required and acoustic noise is zero.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $88.99
Cheaper than about 69% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (4 × 8 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $2.78 per GB
Cheaper than about 91% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM10247212800ECCNRDIMM2R8
Total capacity32 GB (4 × 8 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Memory timings11-11-11
ECC supportYes
Buffer typeUnregistered
Memory rank2Rx8
Heat spreaderBased on Current Inventory (If Required Please Contact)
Power
Rated voltage1.5 V
Compatibility
Compatible systemsSupermicro X10Sll-F, X10Sll+-F, X10Slh-F Motherboard
In the box
Included items4 Memory RAM Sticks

Questions about this item

What does the 1600 MHz rating mean for actual throughput in a Supermicro X10SLL-F?

Each module operates at 1600 MT/s with CL11 timing at 1.5 V, delivering the standard DDR3-1600 data rate when installed in the supported Supermicro boards.

How does the 240-pin DDR3 interface limit speed on these motherboards?

The 240-pin DDR3 slots on the X10SLL-F series cap memory at 1600 MT/s, so this kit runs at the maximum speed the platform allows.

Will the four 8 GB sticks fit the DIMM sockets on an X10SLH-F?

Yes, the kit provides four 240-pin unregistered ECC DIMMs that match the four sockets on the X10SLH-F motherboard.

More in Model-Specific Memory Upgrades

Similar items