We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 32GB (4x8GB) DDR3 1600MHz CL11 1.5V DIMM memory upgrade

SKU CH-058X-4VKFH

Four 8 GB DDR3-1600 DIMMs totalling 32 GB for Dell Optiplex 9010 systems

  • Total capacity32 GB (4 × 8 GB)
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Memory timings11-11-11
  • Rated voltage1.5 V
  • 32 GB total capacity across four 8 GB modules
  • 1600 MHz DDR3 speed rated at PC3-12800
  • CL11 latency with 11-11-11 timing at 1.5 V
  • 240-pin unbuffered non-ECC DIMM form factor
  • Guaranteed compatible with Dell Optiplex 9010 MT/DT/SFF/USFF

Compatible Dell Optiplex 9010 upgrade

This 32GB kit contains four 8GB DDR3 modules that run at 1600MHz with CL11 timings at 1.5V. The 240-pin unbuffered DIMMs are built for Dell Optiplex 9010 MT, DT, SFF and USFF systems. Computer Memory Solutions validates compatibility for these specific models.

Suits owners maxing out the Optiplex 9010

The kit fills all four slots to reach the platform limit of 32GB total memory. Buyers who need ECC error correction or registered modules should look elsewhere because this memory is non-ECC and unbuffered. Systems requiring lower voltage or a different DDR generation cannot use these sticks.

Check your Optiplex 9010 form factor first

Verify the chassis is MT, DT, SFF or USFF before ordering because other Dell models are not covered by the compatibility guarantee. Confirm the board has four free 240-pin slots and that the BIOS is current enough to recognise the full 32GB capacity. Ensure the operating system can address the total amount installed.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $75.99
Cheaper than about 71% of the 21,161 comparable items (median $397.99).
Total capacity 32 GB (4 × 8 GB)
Typical for this category: the median of 20,941 items is 32 GB.
Price per GB $2.37 per GB
Cheaper than about 92% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM10246412800DIMM
Total capacity32 GB (4 × 8 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Memory timings11-11-11
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsDell Optiplex 9010 Mt/Dt/Sff/Usff
In the box
Included items4 Memory RAM Sticks

Questions about this item

Does the Dell OptiPlex 9010 need all four DIMM slots filled for this 32 GB kit to run?

The Dell OptiPlex 9010 has four memory sockets and a maximum capacity of 32 GB, so this 4 x 8 GB kit fills every slot to reach that limit.

Will the 1.5 V DDR3 1600 modules work if I keep any original memory in the system?

All installed DDR3 memory runs at the lowest common speed and voltage; the 1.5 V CL11 modules will operate alongside existing sticks at the settings the BIOS selects for the combined set.

How can I confirm the full 32 GB is recognised after installing the four sticks?

Boot the OptiPlex 9010 and check the system BIOS or Windows Task Manager — both will show 32 GB total when all four 8 GB modules are seated correctly.

More in Model-Specific Memory Upgrades

Similar items