We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR2 667 PC2-5300 DIMM for Dell OptiPlex 745

SKU CH-D207-CRJGE

A 4 GB DDR2 kit (2 × 2 GB) running at 667 MHz, CL5, 1.8 V, unbuffered non-ECC DIMMs built for the Dell OptiPlex 745

  • Total capacity4 GB (2 × 2 GB)
  • Rated speedDDR2 667 (PC2 5300)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL5
  • Memory timings5-5-5
  • Rated voltage1.8 V
  • 4GB dual-channel kit boosts Dell OptiPlex 745 performance
  • 667 MHz DDR2 speed matches system memory bus
  • Non-ECC unbuffered DIMMs install without BIOS changes
  • 240-pin form factor fits desktop memory slots directly
  • Two 2 GB modules populate paired channels for bandwidth

4GB DDR2 Kit for Dell OptiPlex 745

This 4GB kit contains two 2GB DDR2 667 PC2-5300 DIMMs built for the Dell OptiPlex 745 desktop. Each module runs at 1.8V with CL5 5-5-5 timings and uses unbuffered, non-ECC 240-pin DDR2 SDRAM. The 2Rx8 rank configuration and major-brand chipset deliver reliable operation for this specific system.

Ideal for OptiPlex 745 upgrades.

Owners of a Dell OptiPlex 745, 745c or 745 ultra small form factor desktop can install these two sticks to reach 4GB across the board's two or four sockets. Machines that require ECC, registered modules, or a different DDR generation cannot use this kit, and boards limited to lower densities will not recognise the full capacity.

DDR2 667 PC2-5300 speed rating

The decisive specification is the DDR2 667 (PC2-5300) speed grade matched to the OptiPlex 745 memory controller. Installing modules rated for a different speed or voltage will prevent the system from posting, so this exact rating confirms the kit is the correct part for the target desktop.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $17.99
Cheaper than about 92% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB (2 × 2 GB)
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $4.50 per GB
Cheaper than about 81% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM256645300DIMMDR
Total capacity4 GB (2 × 2 GB)
Product type240-Pin DDR2 SDRAM
Performance
Rated speedDDR2 667 (PC2 5300)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL5
Memory timings5-5-5
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.8 V
Compatibility
Compatible systemsThe Dell Optiplex 745 Desktop
In the box
Included items2 Memory RAM Sticks

Questions about this item

Does the Dell OptiPlex 745 need to support DDR2 667 unbuffered non-ECC memory for this kit to work?

Yes, the kit is DDR2 667 PC2-5300 unbuffered non-ECC; the OptiPlex 745 must accept that specification.

Can I keep existing DDR2 modules and add this 2x2GB kit to the remaining slots?

You can mix it with other DDR2 DIMMs, but all sticks will run at the speed and timings of the slowest module installed.

How can I confirm the kit is running at DDR2 667 with CL5 timings after installation?

Open Task Manager’s Performance tab or a tool like CPU-Z; the memory tab should show 667 MHz and 5-5-5 timings at 1.8 V.

More in Model-Specific Memory Upgrades

Similar items