Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 4 GB DDR2 kit (two 2 GB DIMMs) running at 667 MHz with CL5 timing, validated for Gateway DX4640, DX4710-07 and DX4710-EB901A desktops
This 4 GB kit contains two 2 GB DDR2 DIMMs rated for 667 MHz operation at CL5 timings. The modules run at 1.8 V and use the standard 240-pin unbuffered layout. They are built to match the memory slots of the listed Gateway desktops.
Buyers restoring or maxing out a Gateway Dx4640-Ubc01A, Dx4710-07 or Dx4710-Eb901A can install this pair directly. The kit will not suit systems that require ECC, registered modules, a different pin count or a voltage other than 1.8 V.
The decisive specification is the DDR2 667 (PC2-5300) rating with CL5 latency. If the target motherboard calls for this exact speed and timing, the kit will function; if it requires a different DDR2 speed grade, these modules will not be compatible.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM256645300DIMMDR |
| Total capacity | 4 GB (2 × 2 GB) |
| Product type | 240-Pin DDR2 SDRAM |
| Performance | |
| Rated speed | DDR2 667 (PC2 5300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL5 |
| Memory timings | 5-5-5 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.8 V |
| Compatibility | |
| Compatible systems | Gateway Desktop Dx4640-Ubc01A, Dx4710-07, Dx4710-Eb901A |
| In the box | |
| Included items | 2 Memory RAM Sticks |
Each module operates at 1.8V; DDR2 at this voltage typically consumes a few watts per stick under load, so the pair adds only a small amount to total system power.
The board needs two or four DDR2 240-pin DIMM slots that support PC2-5300 667MHz unbuffered non-ECC memory at 1.8V.
The kit runs at CL5 5-5-5; the system will operate all populated slots at the slowest installed module's speed and latency.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?