We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR2 DIMM sticks with black chips, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR2 800MHz ECC Non-Registered DIMM B65

SKU CH-KM6Z-M91AT

A 4 GB DDR2 ECC unregistered kit of two 2 GB modules at 800 MHz, validated for Dell PowerEdge R200 servers

  • Total capacity4 GB (2 × 2 GB)
  • Rated speedDDR2 800 (PC2 6400)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL6
  • Memory timings6-6-6
  • Rated voltage1.8 V
  • ECC safeguards data integrity on Dell PowerEdge R200
  • 800 MHz DDR2 speed matches server specifications
  • 4 GB total capacity in a matched 2 x 2 GB kit
  • 8 V operation meets DDR2 voltage requirements
  • 240-pin unregistered DIMM installs directly into R200 slots

Targeted Server Upgrade

This 4GB kit contains two 2GB DDR2 modules built for the Dell PowerEdge R200. ECC protection and unregistered operation match the server’s memory architecture exactly. The 240-pin form factor installs directly into the four available slots without adapters or configuration changes. System administrators maintaining legacy infrastructure receive guaranteed compatibility from a specialist memory brand.

Thermals and Power

Operating at the standard 1.8V DDR2 voltage, the modules draw minimal power inside the chassis. No heat spreader is fitted, so airflow from the server’s existing fans passes over the chips unimpeded. CL6 timings at 800MHz keep electrical load steady during typical workloads. The design adds no measurable acoustic contribution to the rack environment.

Build and Connectivity

Major-brand chips are assembled on a standard 240-pin PCB with 2Rx8 organisation. Gold edge contacts resist oxidation during long service intervals. The two-stick package lets you populate a pair of slots for dual-channel bandwidth or distribute modules across all four sockets. Physical dimensions follow the JEDEC DIMM outline, so the latching levers engage normally on the R200 motherboard.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $23.99
Cheaper than about 88% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB (2 × 2 GB)
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $6.00 per GB
Cheaper than about 65% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM256726400ECCNRDR
Total capacity4 GB (2 × 2 GB)
Product type240-Pin DDR2 SDRAM
Performance
Rated speedDDR2 800 (PC2 6400)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL6
Memory timings6-6-6
ECC supportYes
Buffer typeUnregistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.8 V
Compatibility
Compatible systemsDell Poweredge R200
In the box
Included items2 Memory RAM Sticks

Questions about this item

How do I install the 240-pin DDR2 DIMMs into the Dell PowerEdge R200 and what step is often missed?

Power off the server, open the chassis, align each 240-pin module with the slot notch, press firmly until the retention clips click, then verify in BIOS that all 4GB are detected at 800 MHz.

What maintenance or replacement will the ECC non-registered memory need over time?

The modules have no heat spreader and run at 1.8V; keep server fans and air filters clean so temperatures stay within spec, and replace any stick that begins reporting correctable ECC errors.

What limit appears first when the memory runs under sustained load in the R200?

The DDR2-800 CL6 timing and 1.8V voltage set the bandwidth ceiling; sustained workloads will saturate the 6400 MT/s data rate before thermal throttling becomes a factor.

More in Model-Specific Memory Upgrades

Similar items