We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 DIMM sticks with black chips

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR3 1333MHz CL9 1.5V 240-Pin DIMM Kit for eMachines EL1352G

SKU CH-18SN-ZENXK

4GB dual-channel DDR3 kit running at 1333 MHz with CL9 timing and 1.5 V, supplied as two 240-pin unbuffered DIMMs validated for the eMachines EL1352G desktop

  • Total capacity4 GB (2 × 2 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Memory timings9-9-9
  • Rated voltage1.5 V
  • 4GB kit upgrades eMachines EL1352G desktop
  • Two 2GB modules enable dual-channel DDR3 bandwidth
  • 1333 MHz CL9 timing matches system spec
  • 5 V unbuffered non-ECC DIMMs fit standard slots
  • 240-pin DDR3 form factor installs without adapters

System-specific DDR3 kit for eMachines EL1352G

This 4 GB kit contains two 2 GB unbuffered DIMMs built to run at 1333 MHz with CL9 timing at 1.5 V. It is validated for the eMachines EL1352G desktop so buyers can install it without guessing compatibility.

Two matched modules remove single-channel bottleneck

The paired sticks let the memory controller operate in dual-channel mode, doubling the data path compared with a single module. No heat spreaders are included, keeping the profile low for tight chassis clearance.

DDR3 1333 interface caps peak bandwidth at PC3-10600

The 240-pin DDR3 standard used here tops out at 10600 MB/s theoretical throughput, so workloads that need higher sustained rates will hit this ceiling. Systems requiring ECC or registered memory cannot use this unbuffered non-ECC kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $15.99
Cheaper than about 93% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB (2 × 2 GB)
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $4.00 per GB
Cheaper than about 84% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM2566410600DIMM
Total capacity4 GB (2 × 2 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
Memory timings9-9-9
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsEmachines El1352G Desktop
In the box
Included items2 Memory RAM Sticks

Questions about this item

Will the 240-pin DDR3 modules need any cleaning or replacement after long-term use?

No routine cleaning or replacement is required; the unbuffered non-ECC DIMMs have no moving parts and carry a limited lifetime warranty from Computer Memory Solutions.

What is the first limit reached when the 1333 MHz CL9 kit runs continuously at full load?

The DDR3-10600 speed rating and CL9 timing set the maximum sustained throughput; the memory controller will throttle before the modules themselves hit a thermal or electrical limit.

How much heat and power do the 1.5 V sticks produce when the eMachines EL1352G runs all day?

Each 2 GB module operates at 1.5 V without a heat spreader, so power draw stays low and passive case airflow is normally sufficient to keep temperatures in check.

More in Model-Specific Memory Upgrades

Similar items