We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR3 1333MHz CL9 1.5V Dell OptiPlex 990

SKU CH-NDPQ-G5GR2

Dual 2 GB DDR3 1333 MHz CL9 unbuffered modules at 1.5 V for Dell OptiPlex 990 DT, MT, SFF and Ultra

  • Total capacity4 GB (2 × 2 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Memory timings9-9-9
  • Rated voltage1.5 V
  • 4GB dual-channel kit boosts Dell OptiPlex 990 responsiveness
  • DDR3 1333 MHz CL9 timing matches factory specifications
  • 5 V unbuffered non-ECC design installs without configuration
  • 240-pin DIMM form factor fits DT, MT and SFF chassis
  • Major-brand chips backed by CMS lifetime warranty

4GB DDR3 Kit for OptiPlex 990

This 4GB kit contains two 2GB DDR3 modules built to match the Dell OptiPlex 990 desktop, mini-tower and small-form-factor systems. The memory runs at 1333MHz with CL9 timing and operates at the standard 1.5V. It is unbuffered, non-ECC and uses a 240-pin DIMM form factor.

Suits OptiPlex 990 owners adding memory

The kit fits the OptiPlex 990 DT, MT and SFF chassis as well as the Ultra by MS variant. It will not work in systems that require ECC, registered modules or a different DDR generation. Buyers needing more than 4GB total capacity or a higher speed grade should look at other options.

1333MHz DDR3 speed confirms fit

The rated speed of DDR3 1333 (PC3 10600) is the single specification that determines whether this kit matches the OptiPlex 990 memory controller. Verify that your system specifies this exact speed before ordering.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB (2 × 2 GB)
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $5.00 per GB
Cheaper than about 77% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM2566410600DIMM1R8
Total capacity4 GB (2 × 2 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
Memory timings9-9-9
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsDell Optiplex 990 Dt / Mt / Sff, Ultra By Ms
In the box
Included items2 Memory RAM Sticks

Questions about this item

Will the 240-pin DDR3 1333 MHz modules run at the correct speed in my OptiPlex 990?

The kit is rated DDR3 1333 (PC3 10600) CL9 at 1.5V, matching the OptiPlex 990 specification; the system will detect and configure the speed automatically.

How can I confirm both 2 GB sticks are recognised after installation?

Open Task Manager or BIOS after boot; total memory should show 4 GB across two slots with each module reporting 1333 MHz and 9-9-9 timing.

What comes in the box and is anything else needed?

The package contains two 240-pin DDR3 DIMMs; no heat spreader, cables or software are included or required.

More in Model-Specific Memory Upgrades

Similar items