We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 DIMM sticks without heat spreaders

Computer Memory Solutions

Computer Memory Solutions 4GB (2x2GB) DDR3 1333MHz CL9 1.5V DIMM memory upgrade

SKU CH-6JE6-W8DGS

4GB dual-channel DDR3 kit at 1333 MHz CL9, 1.5 V, validated for HP ENVY 700-series desktops

  • Total capacity4 GB (2 × 2 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Memory timings9-9-9
  • Rated voltage1.5 V
  • 4GB dual-channel kit boosts multitasking with two matched 2GB modules
  • DDR3 1333MHz CL9 timing delivers responsive desktop performance at standard voltage
  • 240-pin unbuffered non-ECC DIMMs install directly into HP ENVY 700 series desktops
  • Major-brand chipset ensures stable operation across supported workloads
  • Lifetime exchange warranty protects against manufacturing defects

Kit contents

This 4 GB kit contains two 2 GB DDR3 DIMMs running at 1333 MHz with CL9 timing at 1.5 V. It is built for HP ENVY Desktop 700-074 700-075d 700-082d 700-105la systems that use non-ECC unbuffered memory. Buyers needing ECC or registered modules should look elsewhere.

Installation fit

Each stick uses the standard 240-pin DDR3 form factor and drops into any of the four DIMM slots on the compatible HP ENVY desktops. The motherboard supports up to 32 GB total, so this pair leaves two slots free for future expansion. Systems already populated with four modules cannot accept this kit without removing existing memory.

Thermals and power

Modules operate at the standard 1.5 V DDR3 voltage without heat spreaders, relying on case airflow for cooling. Power draw is typical for low-density DDR3 and produces minimal heat under normal desktop workloads. No active cooling or special ventilation is required beyond standard chassis airflow.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB (2 × 2 GB)
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $4.75 per GB
Cheaper than about 80% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM2566410600DIMM
Total capacity4 GB (2 × 2 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
Memory timings9-9-9
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsHP ENVY Desktop 700-074 700-075d 700-082d 700-105la
In the box
Included items2 Memory RAM Sticks

Questions about this item

How many 240-pin DDR3 DIMM slots does the HP ENVY Desktop 700 series provide for this 4GB kit?

The compatible HP ENVY Desktop 700 models listed have four memory sockets supporting up to 32GB total capacity.

What voltage and CAS latency do these unbuffered non-ECC modules run at during continuous operation?

The modules operate at 1.5V with CL9 timing (9-9-9) as specified for this DDR3 1333MHz kit.

Which specific HP ENVY Desktop models are guaranteed compatible with this CM2566410600DIMM memory upgrade?

This kit is validated for HP ENVY Desktop 700-074, 700-075d, 700-082d and 700-105la systems.

More in Model-Specific Memory Upgrades

Similar items