Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 4 GB DDR3 module at 1600 MHz with CL11 timing and 1.5 V, validated for HP Pavilion P7-1299C, P7-1414, P7-1417C, P7-1418 and P7-1430 systems
This 4GB DDR3 1600MHz CL11 DIMM is built for HP Pavilion desktops including the P7-1299C, P7-1414, P7-1417C, P7-1418 and P7-1430. It adds a single 4GB module to systems that accept unbuffered, non-ECC memory. Buyers who need ECC error correction or registered modules should look elsewhere.
The module runs at the standard 1.5V DDR3 voltage with no heat spreader, so it relies on normal case airflow. Passive operation means no fan noise is added. Power draw stays within the usual DDR3 limits for a 4GB stick.
The supported platforms allow up to 32GB total capacity, so this 4GB stick can be combined with others to reach that ceiling. It replaces slower DDR3 modules or fills an empty 240-pin slot. The jump is worth it when the system currently has less than the maximum supported memory and the board accepts 1600MHz CL11 timing.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM5126412800DIMM |
| Total capacity | 4 GB |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1600 (PC3 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| Memory timings | 11-11-11 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | Hp Pavilion P7-1299C, P7-1414, P7-1417C, P7-1418, P7-1430 |
| In the box | |
| Included items | 1 Memory RAM Stick |
Align the notch on the module with the slot key, press down firmly until both side clips snap shut, and verify the system shows 4GB at 1600 MHz in BIOS; the step often missed is seating the stick fully so both clips engage automatically.
No routine maintenance is required; the unbuffered non-ECC DDR3 stick has no moving parts or heat spreader, and CMS provides a limited lifetime warranty when purchased directly from them.
The single 4GB capacity and 1600 MHz CL11 timing become the bottleneck before thermal or voltage limits, capping multitasking headroom and maximum bandwidth at 12800 MB/s.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?