Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
512 MB DDR 266 PC2100 SODIMM upgrade for HP LaserJet 4250 and 5200 series printers
This module is a 512MB DDR 266 (PC 2100) SODIMM built for specific HP LaserJet printers. It targets IT staff or owners who need to upgrade memory in a 4250 or 5200 series device. The stick uses a 100-pin SODIMM form factor and carries no ECC or registered buffering.
The memory runs at 2.5V with CL2.5 3-3-3 timings and has no heat spreader. As a low-power DRAM module it produces negligible heat and no audible noise during normal printer operation. Power draw stays within the printer's original specification so no extra cooling is required.
The 100-pin SODIMM edge connector slots directly into the printer's memory socket without adapters. Unbuffered design keeps installation straightforward for on-site service. Compatibility is guaranteed for the listed 4250 and 5200 models only; other printers are not supported.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM512MBPC2100100PIN |
| Total capacity | 512 MB |
| Performance | |
| Rated speed | DDR 266 (PC 2100) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL2.5 |
| Memory timings | 3-3-3 |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Power | |
| Rated voltage | 2.5 V |
| Compatibility | |
| Compatible systems | Hp Laserjet 4250, 4250Dtn, 4250Dtnsl, 4250N, 4250Tn, 5200Dtn |
| In the box | |
| Included items | 1 Memory RAM Stick |
Power off the printer, open the formatter board cover, align the notch on the 100-pin SODIMM with the slot key, press firmly until both latches click, then close the cover and power on; the step most often missed is seating the module fully so both metal latches engage.
No scheduled maintenance is required; if errors appear, reseat the SODIMM and clean the gold contacts with a lint-free cloth, otherwise the module runs for the life of the printer unless a hardware fault develops.
The 512 MB capacity is the first bottleneck; once the print buffer fills, the printer pauses to spool to disk, so sustained throughput is limited by the amount of installed RAM rather than the 266 MHz speed.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?