We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green 100-pin SODIMM memory module with black chips

Computer Memory Solutions

Computer Memory Solutions 512MB DDR 333 (PC2700) SODIMM 100-Pin memory upgrade

SKU CH-1J0B-5M4CJ

512 MB DDR 333 SODIMM upgrade for Kyocera FS-9130N, FS-9530N, KM-C3225 and FS-C8100D printers

  • Total capacity512 MB
  • Rated speedDDR 333 (PC 2700)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL2.5
  • Memory timings3-3-3
  • Rated voltage2.5 V
  • 512 MB capacity supports larger workloads in compatible Kyocera printers
  • DDR 333 (PC2700) speed matches original system specifications
  • CL2.5 CAS latency with 3-3-3 timing for responsive memory access
  • 100-pin SODIMM form factor fits designated Kyocera printer models
  • Unbuffered non-ECC design ensures correct operation in target devices

Compatible Kyocera printer upgrade

This 512 MB SODIMM module is built for Kyocera FS-9130N, FS-9530N, KM-C3225 and FS-C8100D printers. It adds a single stick of DDR 333 (PC2700) memory to systems that accept 100-pin unbuffered non-ECC modules. Installation is a straightforward slot insertion.

Suits owners of listed Kyocera models

Printers outside the four named models cannot be guaranteed to work with this part. Buyers who need ECC, registered memory or a different pin count should look elsewhere. The stick is sold as a single piece, so configurations requiring matched pairs are not served by this item.

100-pin DDR 333 SODIMM form factor

The module uses a 100-pin SODIMM edge connector and runs at 2.5 V with CL2.5 timing. Only systems designed for this exact pin layout and voltage will recognise the upgrade. Verify the printer’s service manual before purchasing.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $18.99
Cheaper than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 512 MB
Lower than about 99% of the 20,941 comparable items (median 32 GB).
Price per GB $37.09 per GB
Pricier than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM512MBPC2700100PIN
Total capacity512 MB
Performance
Rated speedDDR 333 (PC 2700)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL2.5
Memory timings3-3-3
ECC supportNo
Buffer typeUnbuffered
Heat spreaderNo
Power
Rated voltage2.5 V
Compatibility
Compatible systemsKyocera Fs-9130N, Fs-9530N, Km-C3225, Fs-C8100Dn
In the box
Included items1 Memory RAM Stick

Questions about this item

What speed does the PC2700 100-pin SODIMM run at?

The module operates at 333 MHz, matching the PC2700 standard for DDR SODIMM memory.

Which Kyocera printers accept this 100-pin DDR SODIMM?

It is compatible with Kyocera FS-9130N, FS-9530N, KM-C3225 and FS-C8100D models.

How is the 512MB SODIMM installed and what step is often missed?

Power off the printer, open the memory cover, insert the stick at an angle until the clips snap, then close the cover before powering on.

More in Model-Specific Memory Upgrades

Similar items