We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 64GB (4x16GB) DDR4 2400 CL17 D1540D4I Fatal1ty X299 memory upgrade

SKU CH-79V1-ZXP53

64 GB kit of four 16 GB DDR4 2400 CL17 unbuffered DIMMs validated for ASRock X299 and X399 Fatal1ty boards

  • Total capacity64 GB (4 × 16 GB)
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL17
  • Memory timings17-17-17
  • Rated voltage1.2 V
  • 64 GB total capacity across four 16 GB modules
  • DDR4 2400 MHz speed rated at PC4-19200
  • CL17 CAS latency with 17-17-17 timing
  • 2 V unbuffered non-ECC DIMMs for broad compatibility
  • Validated for ASRock D1540D4I and Fatal1ty X299, X399, X99 boards

Capacity and kit size

This 64GB kit contains four 16GB DDR4 2400 CL17 modules in a 288-pin DIMM form factor. The memory runs at 1.2V with 17-17-17 timings and uses unbuffered, non-ECC chips. It is built for ASRock D1540D4I, Fatal1ty X299, X399 and X99 Professional series boards that accept this specification.

Builders who need this exact configuration

The kit suits users upgrading the listed ASRock platforms to 64GB using four matched sticks. Builders whose boards require ECC or registered DIMMs cannot use these modules. Systems limited to lower speeds or different pin counts should look at other memory. Buyers needing more than 128GB total capacity or eight populated sockets must choose a different solution.

Speed and latency target

The decisive specification is the DDR4 2400 CL17 rating (PC4-19200). If your motherboard and CPU combination requires this exact speed and latency pair, the kit will operate as intended; if the platform demands a different data rate or tighter timings, this memory will not meet that requirement.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $357.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 64 GB (4 × 16 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $5.59 per GB
Cheaper than about 69% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM2048642400DIMM
Total capacity64 GB (4 × 16 GB)
Product type288-Pin DDR4 SDRAM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL17
Memory timings17-17-17
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsASRock D1540D4I, Fatal1ty X299 Gaming K6, Fatal1ty X299 Professional Gaming i9, Fatal1ty X399 Professional Gaming, Fatal1ty X99 Professional
In the box
Included items4 Memory RAM Sticks

Questions about this item

Will the 2400 MHz speed run at full rate on my Fatal1ty X299 board?

The kit is rated for DDR4 2400 (PC4 19200) and the listed ASRock X299 boards support that speed, so the modules will operate at 2400 MHz without manual tuning.

Does the 288-pin DDR4 interface limit total capacity on these motherboards?

Each board accepts 288-pin DDR4 DIMMs up to 128 GB across its eight sockets, so this 64 GB kit fits well within the maximum.

Will the four 16 GB sticks physically fit the DIMM slots on an ASRock D1540D4I?

The modules are standard 288-pin DDR4 DIMMs without heat spreaders, matching the slot layout of the D1540D4I and the Fatal1ty boards listed.

More in Model-Specific Memory Upgrades

Similar items