We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 DIMM sticks without heat spreaders

Computer Memory Solutions

Computer Memory Solutions 8GB (2×4GB) DDR3 1600MHz CL11 1.5V 240-pin DIMM memory upgrade

SKU CH-ST8J-EBGGV

Dual 4 GB DDR3 modules at 1600 MHz CL11 1.5 V for Dell Optiplex 9020 MT, SFF and USFF desktops

  • Total capacity8 GB (2 × 4 GB)
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Memory timings11-11-11
  • Rated voltage1.5 V
  • 8 GB dual-channel kit boosts multitasking headroom with two matched 4 GB modules
  • 1600 MHz DDR3 speed delivers responsive desktop performance at PC3-12800 bandwidth
  • CL11 11-11-11 timings keep latency low for everyday workloads
  • 5 V unbuffered non-ECC design fits standard Dell Optiplex 9020 MT SFF USFF slots
  • 240-pin DIMM form factor installs directly into the four available memory sockets

Dell Optiplex 9020 DDR3 memory kit

This 8 GB kit contains two 4 GB unbuffered DDR3 DIMMs rated at 1600 MHz with CL11 timing. It is built specifically for Dell Optiplex 9020 MT, SFF and USFF desktops. The modules run at 1.5 V and use major-brand chips without heat spreaders.

Check your Optiplex 9020 form factor

Verify that your system is an Optiplex 9020 MT, SFF or USFF before ordering. The board accepts up to 32 GB across four slots, so confirm how many slots are free. Ensure the existing memory is non-ECC DDR3, because ECC or registered modules will not work in these desktops.

Upgrades older DDR3 configurations

Replaces slower DDR3 modules or smaller capacity sticks to reach the 32 GB maximum. The jump is worthwhile when current memory limits multitasking or forces paging. Buyers who need ECC, registered DIMMs or a different DDR generation cannot use this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $23.99
Cheaper than about 88% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB (2 × 4 GB)
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $3.00 per GB
Cheaper than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM5126412800DIMMHDR
Total capacity8 GB (2 × 4 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Memory timings11-11-11
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsDell Optiplex 9020 Mt, 9020 Sff, 9020 Usff Desktop
In the box
Included items2 Memory RAM Sticks

Questions about this item

Does the kit include both memory modules or do I need to buy a second 4GB stick separately?

The package contains two 4GB DDR3 DIMMs for a total of 8GB, so no extra modules are required.

Should I choose the 8GB (2×4GB) kit or a single 8GB module for my Optiplex 9020?

The 2×4GB kit fills two of the four slots and leaves room to reach the 32GB maximum later.

Will the CL11 1600MHz rating actually run at 1600MHz once installed in a Dell Optiplex 9020?

Yes, the modules are rated DDR3 1600 (PC3 12800) and will operate at that speed in the Optiplex 9020.

More in Model-Specific Memory Upgrades

Similar items