We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green 204-pin DDR3 SO-DIMM sticks in anti-static tray

Computer Memory Solutions

Computer Memory Solutions 8GB (2 x 4GB) DDR3 1333 CL7 SODIMM Kit

SKU CH-GQZR-MHDSX

An 8 GB dual-channel DDR3 kit with two 4 GB SO-DIMMs running at 1333 MHz and CL7 latency for compatible HP Omni all-in-one systems

  • Total capacity8 GB (2 × 4 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL7
  • Memory timings7-7-7
  • Rated voltage1.5 V
  • 8GB total capacity for responsive multitasking with two 4GB modules
  • CL7 latency at DDR3 1333MHz for faster data access
  • 5V unbuffered non-ECC design matches system requirements
  • 204-pin SODIMM form factor fits HP Omni 120-1105Z and 120-2010A
  • Lifetime warranty from Computer Memory Solutions guarantees compatibility

Targeted DDR3 Upgrade

This 8 GB kit uses two 4 GB DDR3 1333 CL7 SO-DIMM modules built for the HP Omni 120-1105Z and 120-2010A all-in-one desktops. It is designed for owners of those specific systems who need to reach the maximum supported memory capacity on a 64-bit operating system. The unbuffered non-ECC design matches the platform requirements exactly.

Plug-In Module Design

Each stick is a standard 204-pin SO-DIMM without a heat spreader, allowing it to fit the tight internal slots of the target Omni models. The 1.5 V operating voltage and 7-7-7 timing align with the system's DDR3 1333 specification. Installation is a direct replacement for the factory memory, requiring no configuration changes in the BIOS.

Maximum Capacity Step

The kit raises a compatible 64-bit system from a lower factory amount to the full 8 GB limit the chipset accepts. It replaces slower PC3-8500 modules with faster PC3-10600 parts where applicable. The upgrade is worthwhile when the current installation is below 8 GB and the OS can address the additional space. It does not suit 32-bit environments limited to 4 GB or systems requiring ECC or registered memory.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $40.99
Cheaper than about 80% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB (2 × 4 GB)
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $5.12 per GB
Cheaper than about 75% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM5126410600SODRH
Total capacity8 GB (2 × 4 GB)
Product type204-Pin DDR3 SO-DIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL7
Memory timings7-7-7
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsHp Omni Omni 120-1105Z, 120-2010A
In the box
Included items2 Memory RAM Sticks

Questions about this item

What maximum speed does the PC3-10600 DDR3 SO-DIMM interface support on this kit?

The PC3-10600 rating corresponds to DDR3 1333 MHz, which is the top speed these modules are specified for.

Will the 204-pin SO-DIMM modules fit the 200-pin slots listed for the HP Omni 120-1105Z and 120-2010A?

The modules are 204-pin DDR3 SO-DIMMs, the standard for DDR3 laptop memory, and they install in the two SO-DIMM sockets on those systems.

How are the two 4 GB sticks installed, and what common mistake should be avoided?

Power off the all-in-one, open the memory door, insert each stick at an angle until the gold contacts disappear, then press down until the side clips click; the mistake is stopping before the clips lock.

More in Model-Specific Memory Upgrades

Similar items