We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR2 FB-DIMM sticks, 240-pin, no heat spreader

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR2 5300 667MHz ECC FB-DIMM - B54

SKU CH-4P1C-W6WHR

8GB (2×4GB) DDR2 667MHz ECC fully buffered DIMM kit for Dell PowerEdge SC1430 servers

  • Total capacity8 GB (2 × 4 GB)
  • Rated speedDDR2 667 (PC2 5300)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL5
  • Memory timings5-5-5
  • Rated voltage1.8 V
  • ECC protection safeguards data integrity on the Dell PowerEdge SC1430
  • Fully buffered architecture stabilises signals for reliable server operation
  • DDR2-667 speed matches the system memory bus for correct timing
  • 2x4GB kit fills two slots to reach 8GB total capacity
  • 240-pin form factor fits the SC1430 memory sockets exactly

Fully Buffered DDR2 for Dell PowerEdge SC1430

This 8 GB kit supplies two 4 GB DDR2-667 fully buffered ECC modules built for the Dell PowerEdge SC1430 server. The 240-pin FB-DIMMs run at 1.8 V with CL5 timing and a 2Rx4 organisation. They are intended for administrators upgrading or repairing that specific platform.

Replaces lower-capacity

The server supports up to 16 GB across four sockets, so this kit fills half the maximum configuration. The jump is worthwhile when the system currently runs with 4 GB or less, or when existing modules show errors and ECC protection is required for data integrity.

Verify FB-DIMM slots and DDR2 requirement before

The PowerEdge SC1430 accepts only fully buffered DDR2 memory; standard registered or unbuffered DDR2 will not function. Confirm the server has free 240-pin FB-DIMM slots and that the BIOS is current enough to recognise 4 GB ranks. This kit is not suitable for any desktop or non-FB-DIMM platform.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $35.99
Cheaper than about 82% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB (2 × 4 GB)
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $4.50 per GB
Cheaper than about 81% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM512725300FBDIMM
Total capacity8 GB (2 × 4 GB)
Product type240-Pin DDR2 SDRAM
Performance
Rated speedDDR2 667 (PC2 5300)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL5
Memory timings5-5-5
ECC supportYes
Buffer typeFully Buffered
Memory rank2Rx4
Heat spreaderNo
Power
Rated voltage1.8 V
Compatibility
Compatible systemsDell Poweredge Sc1430
In the box
Included items2 Memory RAM Sticks

Questions about this item

Will the 240-pin DDR2 FB-DIMM modules fit the Dell PowerEdge SC1430 memory slots?

Yes, the 240-pin fully buffered DDR2 DIMMs are built for the SC1430's four registered memory sockets and will seat correctly in each slot.

What is the correct order for installing the two 4 GB sticks in the SC1430?

Populate the lowest-numbered sockets first, typically DIMM 1 and DIMM 2, so the memory controller initialises both channels in the proper sequence.

When should the ECC FB-DIMM kit be replaced in a Dell PowerEdge SC1430?

Replace the modules if the server logs correctable ECC errors that become uncorrectable, or if diagnostics report a persistent failure on either 4 GB stick.

More in Model-Specific Memory Upgrades

Similar items