Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR3 1066MHz CL7 SO-DIMM kit (2×4GB) validated for 21.5-inch iMac Late 2009
This 8 GB kit contains two 4 GB DDR3 SO-DIMM modules built for the Apple iMac "Core 2 Duo" 3.06 21.5-Inch (Late 2009). It matches the factory specification of PC3-8500 speed, CL7 latency and 1.5 V operation. The 204-pin unbuffered, non-ECC design installs directly into the two free slots.
The 204-pin SO-DIMM form factor fits only notebook and all-in-one sockets wired for DDR3 signalling. PC3-8500 modules run at 1066 MHz; faster DDR3 sticks will down-clock but cannot exceed the platform’s native bus. Total system capacity is capped at 16 GB across four slots, so this kit leaves two slots open.
The iMac 10,1 (A1311) officially supports a maximum of 16 GB, so this 8 GB kit suits users who need a mid-range upgrade without filling every slot. Buyers who want the full 16 GB must add a second identical kit. Systems already at the 16 GB ceiling cannot use these modules.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM512648500SODRH |
| Total capacity | 8 GB (2 × 4 GB) |
| Product type | 204-Pin DDR3 SO-DIMM |
| Performance | |
| Rated speed | DDR3 1066 (PC3 8500) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| Memory timings | 7-7-7 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | Apple Imac "Core 2 Duo" 3.06 21.5 in (Late 2009) |
| In the box | |
| Included items | 2 Memory RAM Sticks |
The iMac supports up to 16GB across four slots. This 8GB kit fills two slots, leaving two free for a future upgrade to the maximum.
The memory will run at 1066MHz with CL7 timing at 1.5V, matching the speed the late 2009 iMac expects for DDR3 SO-DIMM modules.
Yes, the 204-pin DDR3 SO-DIMM form factor is the exact interface used by the iMac10,1 (A1311) and the modules are unbuffered, non-ECC as required.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?