We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3-1333 ECC Registered DIMM memory upgrade

SKU CH-0X3W-VVHV3

An 8 GB DDR3-1333 ECC registered DIMM kit for Dell PowerEdge R710 servers

  • Total capacity8 GB (2 × 4 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Memory timings9-9-9
  • Rated voltage1.5 V
  • ECC protection prevents data errors in critical workloads
  • Registered design supports dense 48 GB or 192 GB server configurations
  • 1333 MHz DDR3 speed matches Dell PowerEdge R710 specifications
  • Dual-rank 2Rx4 organisation maximises memory bandwidth
  • 2 × 4 GB kit enables dual-channel installation

Dell PowerEdge R710 ECC Kit

This 8 GB kit contains two 4 GB registered ECC DIMMs built for the Dell PowerEdge R710 server. Each module runs at DDR3-1333 with a CL9 timing and 1.5 V operation. The registered design adds signal buffering for stable multi-module configurations. It targets administrators expanding memory in compatible Dell rack servers.

8 GB Registered Capacity

The paired modules provide 8 GB of ECC protected memory for workloads that demand error correction. Registered signalling supports larger populations than unbuffered alternatives, yet the system caps registered DIMM populations at eighteen sockets across six banks. Quad-rank modules in the second bank drop to 800 MHz, and a third bank is disabled when quad-rank DIMMs are installed.

DDR3-1333 Interface Limits

The DDR3 interface operates at 1333 MHz but automatically clocks down to 1066 MHz or 800 MHz depending on the installed Xeon model and bank population. Mixing registered and unbuffered ECC modules is not supported. Maximum registered ECC capacity reaches 288 GB with dual CPUs, while unbuffered ECC tops out at 192 GB.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB (2 × 4 GB)
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $2.50 per GB
Cheaper than about 92% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM5127210600ECCR2R4H
Total capacity8 GB (2 × 4 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
Memory timings9-9-9
ECC supportYes
Buffer typeRegistered
Memory rank2Rx4
Heat spreaderBased on Current Inventory (If Required Please Contact)
Power
Rated voltage1.5 V
Compatibility
Compatible systemsDell Poweredge R710
In the box
Included items2 Memory RAM Sticks

Questions about this item

Will these DDR3-1333 modules run at full speed in my Dell PowerEdge R710 with older Xeon CPUs installed?

The modules will automatically clock down to 1066 MHz or 800 MHz depending on which Xeon model is fitted and how many banks are populated.

How can I confirm the ECC registered memory is detected correctly after installation?

Enter the system BIOS or use Dell OpenManage to verify all DIMM slots show 4 GB ECC Registered modules running at the expected speed.

Does the kit include any heat spreaders or extra cables for the PowerEdge R710?

The package contains two 4 GB DDR3 ECC Registered DIMMs only; heat spreaders are included only if current inventory requires them.

More in Model-Specific Memory Upgrades

Similar items