Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB kit of two 4GB DDR3-1333 SODIMM modules for the 21.5-inch 2010 iMac
This 8 GB kit contains two 4 GB unbuffered non-ECC modules built to the DDR3 1333 PC3 10600 standard. They use the 204-pin SO-DIMM form factor and run at 1.5 V with CL7 7-7-7 timings. The kit is validated for the 21.5 inch Mid-2010 iMac with a 3.2 GHz Core i3 processor (model MC509LL/A).
Supplying a pair of identical sticks lets the memory controller run in dual-channel mode, which increases usable bandwidth compared with a single module. The 2Rx8 rank organisation and major-brand chipset are selected to meet the iMac's timing requirements without manual configuration.
Buyers needing more than 8 GB or wanting ECC error correction should look elsewhere, as this kit is non-ECC and limited to two 4 GB modules. Systems that require registered or buffered memory, or a different pin count or voltage, are not compatible.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM5126410600SODRH |
| Total capacity | 8 GB (2 × 4 GB) |
| Product type | 204-Pin DDR3 SO-DIMM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL7 |
| Memory timings | 7-7-7 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | Apple Imac "Core I3 in 3.2 21.5 in (Mid-2010) Mc509Ll/A |
| In the box | |
| Included items | 2 Memory RAM Sticks |
The modules run at CL7 7-7-7 timings at 1.5V; the iMac firmware sets these automatically so no manual adjustment is required.
The iMac 21.5-inch Mid-2010 supports a maximum of 16GB across its four sockets, so adding this 8GB kit leaves room for another 8GB if needed.
Without a heat spreader the 1.5V DDR3-1333 modules run at standard JEDEC power levels; the iMac's internal airflow is designed to handle that thermal load continuously.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?