We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 DIMM sticks, 240-pin, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions 8GB (2x4GB) DDR3 1333MHz CL9 1.5V 240-Pin DIMM HP 6200 Pro SFF/MT A69

SKU CH-DR6G-2JKFA

An 8 GB DDR3 kit (2 × 4 GB) running at 1333 MHz CL9 1.5 V, validated for HP 6200 Pro SFF/MT desktops

  • Total capacity8 GB (2 × 4 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Memory timings9-9-9
  • Rated voltage1.5 V
  • 8GB dual-channel kit expands HP 6200 Pro memory to 16GB maximum
  • 1333 MHz DDR3 speed matches system specification for stable operation
  • CL9 9-9-9 timing at 1.5V delivers reliable desktop performance
  • 240-pin unbuffered non-ECC DIMMs fit SFF and MT chassis slots
  • Two 4GB modules install directly into the four available memory sockets

HP 6200 Pro SFF/MT DDR3 Kit

This 8 GB kit contains two 4 GB unbuffered DIMMs built for HP Compaq Business Desktop 6200 Pro small-form-factor and mini-tower models. It targets owners of those systems who need a matched pair to populate the board's four slots up to the 16 GB maximum.

240-pin DIMM layout and 1.5 V operation

Each module uses a standard 240-pin DDR3 interface and runs at the JEDEC 1.5 V level, so it drops straight into the factory slots without voltage tweaks. The absence of a heat spreader keeps the profile low enough for the tight clearance inside the SFF chassis.

1333 MHz CL9 non-ECC specification

The kit is rated at DDR3 1333 (PC3 10600) with 9-9-9 timings and no error-correction circuitry, matching the platform's supported speed and latency. Systems that require registered or ECC memory cannot use these modules.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $33.99
Cheaper than about 83% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB (2 × 4 GB)
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $4.25 per GB
Cheaper than about 83% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM5126410600DIMM
Total capacity8 GB (2 × 4 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
Memory timings9-9-9
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsHp/Compaq Business Desktop 6200 Pro (Sff/Mt)
In the box
Included items2 Memory RAM Sticks

Questions about this item

What DDR3 speed and PC rating does this kit run at?

The kit operates at DDR3 1333 MHz, which corresponds to the PC3 10600 standard.

Will these 240-pin DIMMs fit inside an HP 6200 Pro small-form-factor or micro-tower chassis?

Yes, the modules are 240-pin DDR3 DIMMs designed for the HP 6200 Pro SFF and MT models.

How do I install the two sticks correctly, and what is the common mistake to avoid?

Power off the PC, open the case, align each module's notch with the slot key, press down firmly until the retention clips click; the common mistake is not seating the stick fully so the clips do not engage.

More in Model-Specific Memory Upgrades

Similar items