Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
8GB DDR4 2400 CL17 DIMM for Dell OptiPlex 7040 SFF and 7050 SFF/Tower systems
This 8 GB DDR4 module runs at 2400 MHz with CL17 timings and 1.2 V operation. It is built as a 2Rx8 unbuffered non-ECC stick for Dell OptiPlex 7040 SFF and 7050 SFF or Tower systems. The single-piece kit adds one 288-pin DIMM to a compatible machine.
Verify that your OptiPlex has a free 288-pin DDR4 slot and that total installed memory will not exceed the 64 GB platform limit across four sockets. The module is not ECC or registered, so it will not work in servers or workstations that require those features. Confirm the system BIOS is current for reliable detection.
Without a heat spreader the DRAM relies on case airflow to maintain 1.2 V stability during long sessions. CL17 latency remains consistent as the controller manages refresh cycles across the dual-rank layout. Extended workloads such as large dataset processing or virtual machines will not trigger throttling if chassis cooling is adequate.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM1024642400DIMM |
| Total capacity | 8 GB |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| Memory timings | 17-17-17 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Dell OptiPlex 7040 SFF, OptiPlex 7050 SFF/Tower |
| In the box | |
| Included items | 1Memory Ram Stick |
The box holds one 8GB 288-pin DDR4 2400 CL17 unbuffered DIMM. No brackets, cables or extra parts are required for installation in the listed Dell OptiPlex models.
The board supports up to 64GB across four slots. One 8GB stick leaves three slots open for future upgrades; a full 64GB kit is only needed if you want maximum capacity immediately.
The module runs at DDR4 2400 (PC4-19200) with 17-17-17 timings at 1.2V. The OptiPlex 7050 Tower’s memory controller will operate it at that rated speed without manual configuration.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?