We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Two green DDR3 SODIMM sticks, 204-pin, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM10246410600SODRH 16GB 2x8GB DDR3 1333 PC3-10600 SODIMM

SKU CH-QVCG-RD6HQ

16 GB kit of two 8 GB DDR3 SODIMM modules at 1333 MHz CL9 for HP EliteBook 2170p and 2760p

  • Total capacity16 GB (2 × 8 GB)
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Memory timings9-9-9
  • Rated voltage1.5 V
  • 16 GB dual-channel kit upgrades EliteBook 2170p and 2760p
  • DDR3 1333 MHz PC3-10600 speed matches factory spec
  • CL9 9-9-9 timings at 1.5 V for stable operation
  • Two 8 GB unbuffered non-ECC 204-pin SO-DIMMs included
  • CMS lifetime warranty backs guaranteed compatibility

What this kit does for EliteBook 2170P and 2760P

This 16 GB kit contains two 8 GB DDR3 SODIMM modules rated at 1333 MHz with CL9 timing. It is built for HP and Compaq EliteBook 2170P and 2760P notebooks that accept 204-pin unbuffered non-ECC memory at 1.5 V. The matched pair fills both available slots and reaches the platforms' supported maximum of 16 GB.

Behaviour under sustained load

Each module uses a 2Rx8 organisation with major-brand chips running at the standard 1.5 V. Because the parts are unbuffered and non-ECC, they operate with the low latency the chipset expects, and the CL9 9-9-9 timings remain stable during extended workloads such as large spreadsheet recalculations or multi-tab browsing sessions. The absence of a heat spreader is normal for this form factor and the notebooks' internal airflow handles the thermal load.

Check your current configuration before ordering

Verify that the laptop is an EliteBook 2170P or 2760P and that both SODIMM sockets are free or occupied by removable modules. The system must support DDR3 1333 PC3-10600 at 1.5 V with unbuffered non-ECC 204-pin SO-DIMMs. If the machine already contains 16 GB, this kit will not increase capacity beyond the platform limit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $44.99
Cheaper than about 79% of the 21,161 comparable items (median $397.99).
Total capacity 16 GB (2 × 8 GB)
Lower than about 70% of the 20,941 comparable items (median 32 GB).
Price per GB $2.81 per GB
Cheaper than about 91% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM10246410600SODRH
Total capacity16 GB (2 × 8 GB)
Product type204-Pin DDR3 SO-DIMM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
Memory timings9-9-9
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsHp/Compaq Elitebook 2170P, Elitebook 2760P
In the box
Included items2 Memory RAM Sticks

Questions about this item

How much power does this 1.5 V DDR3 kit draw during continuous use?

Each module runs at the standard DDR3 1.5 V; actual draw depends on the notebook's memory controller and workload.

What must the notebook provide for these 204-pin SODIMMs to work?

Two free DDR3 SO-DIMM slots that accept 1333 MHz PC3-10600 unbuffered non-ECC memory at 1.5 V.

Will this 16 GB kit run in an EliteBook 2170p that currently has 4 GB installed?

Yes, the 2170p supports up to 16 GB across its two slots, so replacing the existing modules with this 2 x 8 GB kit works.

More in Model-Specific Memory Upgrades

Similar items