We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Single green 240-pin DDR3 DIMM module with black chips no heat spreader

Computer Memory Solutions

Computer Memory Solutions CM10246412800DIMM 8GB DDR3 1600MHz Dell Optiplex 9020 Mt Sff Usff memory upgrade

SKU CH-SR1P-2QJ4X

8GB DDR3 1600MHz DIMM module with CL11 timing and 1.5V operation for Dell Optiplex 9020 MT, SFF and USFF systems

  • Total capacity8 GB
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Memory timings11-11-11
  • Rated voltage1.5 V
  • 8GB capacity boosts multitasking on Dell Optiplex 9020
  • 1600MHz DDR3 speed matches system specification exactly
  • CL11 timing ensures stable operation at 1.5V
  • 240-pin DIMM fits MT, SFF and USFF chassis
  • Lifetime warranty backs guaranteed compatibility with Optiplex 9020

Targeted upgrade for Dell Optiplex 9020

This 8 GB DDR3 module is built specifically for the Optiplex 9020 in MT, SFF and USFF chassis. It plugs straight into a 240-pin DIMM slot and runs at 1600 MHz with CL11 timing. The single-stick design leaves three slots free for future expansion up to the platform maximum of 32 GB. Buyers needing ECC or registered memory should look elsewhere.

Cool and quiet operation

Running at the standard 1.5 V, the stick draws minimal power and produces no audible noise because it has no moving parts. Without a heat spreader it relies on normal case airflow, which is sufficient for the rated speed. The low thermal load keeps internal temperatures stable during typical office workloads. No additional cooling or voltage tuning is required.

Simple installation and broad compatibility

The unbuffered, non-ECC design uses a major-brand chipset in a 2Rx8 configuration for reliable operation. A 240-pin edge connector ensures a firm seat in any of the four motherboard slots. Physical dimensions match the standard DIMM profile so the module clears CPU coolers and drive cages in all three Optiplex form factors. Systems requiring registered or fully buffered DIMMs cannot use this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $33.99
Cheaper than about 83% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $4.25 per GB
Cheaper than about 83% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM10246412800DIMM
Total capacity8 GB
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Memory timings11-11-11
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsDell Optiplex 9020 Mt/Sff/Usff
In the box
Included items1 Memory RAM Stick

Questions about this item

How do I install this 240-pin DDR3 DIMM in my Optiplex 9020 and which step is most often missed?

Power off, unplug, open the case, align the notch on the 240-pin module with the slot key, press firmly until both side clips click shut, then close the case; the step most often missed is verifying both clips have fully locked.

What maintenance or replacement will this 8GB 1600MHz module need during its service life?

No routine maintenance is required; if a fault occurs the module is covered by a limited lifetime warranty for exchange when purchased directly from Computer Memory Solutions.

What limit appears first when this CL11 1.5V memory runs under sustained load?

The system maximum of 32GB across four sockets is reached before any thermal or electrical limit of this unbuffered non-ECC module.

More in Model-Specific Memory Upgrades

Similar items