Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB dual-channel DDR4-2400 CL17 kit validated for Supermicro X11SAE-series motherboards
This 16 GB kit contains two 8 GB DDR4 modules built for Supermicro X11SAE, X11SAE-F and X11SAE-M motherboards. Each stick is a 288-pin unbuffered DIMM rated at 2400 MHz with CL17 timings. The modules operate at 1.2 V and use a 2Rx8 rank configuration without ECC or a heat spreader.
At the rated 2400 MHz speed the modules run continuously within standard JEDEC voltage limits, so thermal output remains predictable during long compute sessions. Because all installed memory runs at the slowest module or CPU capability, matching pairs like this kit avoid down-clocking that would occur with mixed speeds. The 17-17-17 timing stays consistent across sustained workloads without relying on overclocking headroom.
The supported Supermicro boards provide four DIMM slots and a 64 GB maximum capacity, so this 16 GB kit leaves room for expansion up to the platform ceiling. A 64-bit operating system is required to address more than 4 GB of memory. Mixing these sticks with modules of different speeds or latencies will force the entire array to run at the lowest common denominator.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM1024642400DIMM |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| Memory timings | 17-17-17 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro X11SAE, X11SAE-F, X11SAE-M Motherboards |
| In the box | |
| Included items | 2 Memory RAM Sticks |
Each module operates at 1.2 V; total kit power equals 1.2 V multiplied by the combined current draw of the two sticks under load.
The kit is validated for the X11SAE, X11SAE-F and X11SAE-M boards; any BIOS that supports those boards will recognise the memory.
All installed memory runs at the slowest module's rated speed or the CPU's maximum supported DDR4 frequency, whichever is lower.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?