Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
32GB kit of four 8GB DDR4 2400MHz CL17 unbuffered DIMMs validated for Supermicro X11SAE series motherboards
This 32 GB kit contains four 8 GB DDR4 2400 MHz modules built for Supermicro X11SAE, X11SAE-F and X11SAE-M motherboards. The DIMMs run at 1.2 V with CL17 17-17-17 timing and use unbuffered non-ECC 288-pin layout. They suit administrators upgrading compatible servers to the platform maximum of 64 GB.
The kit targets users who need all four slots populated with identical modules to reach 64 GB total capacity on the supported Supermicro platforms. It is not for systems that require ECC or registered memory, nor for boards limited to two DIMM slots. Buyers needing higher frequencies or different densities should look at other specifications.
Install by seating each 288-pin module into the four DDR4 slots until the retention clips lock. The manufacturer recommends matched-pair placement for optimal performance and notes that mixing different modules will force all memory to run at the slowest installed speed. A 64-bit operating system is required to address more than 4 GB.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM1024642400DIMM |
| Total capacity | 32 GB (4 × 8 GB) |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2400 (PC4 19200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL17 |
| Memory timings | 17-17-17 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Supermicro X11SAE, X11SAE-F, X11SAE-M Motherboards |
| In the box | |
| Included items | 4 Memory RAM Sticks |
Yes, the kit contains four 8 GB sticks, so it occupies all four DIMM slots on the Supermicro X11SAE, X11SAE-F or X11SAE-M boards.
All memory in the system runs at the speed of the slowest installed modules or the CPU limit, so the kit will drop to match any slower DDR4 already present.
Check the memory speed and timings in the BIOS or with a tool such as CPU-Z; they should show 2400 MHz and 17-17-17 when the system is using the full kit.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?