Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
16 GB DDR3 ECC kit in two 8 GB modules running at 1333 MHz for Dell PowerEdge T110 II servers
This 16GB kit contains two 8GB DDR3 1333 modules built for the Dell PowerEdge T110 II server. Each stick is an unregistered ECC DIMM with CL9 timings and 1.5V operation. The kit is designed for Xeon E3 series processors that require ECC unbuffered memory. It adds capacity to systems supporting up to 32GB across four sockets.
Before ordering, confirm the server has four available 240-pin DDR3 slots and that the installed Xeon E3 processor requires unbuffered ECC modules. Registered ECC memory is not supported on this platform. The motherboard maximum is 32GB, so this 16GB kit leaves room for a second identical kit if all four sockets are populated. Check current memory configuration to avoid mixing registered and unbuffered types.
Operating at 1.5V, these modules draw modest power and generate limited heat inside the PowerEdge T110 II chassis. The unregistered design avoids the extra buffer chip found on registered DIMMs, reducing thermal load. Standard server airflow is sufficient for normal workloads; no additional cooling is required. Noise levels remain unchanged because the memory adds no moving parts.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM10247210600ECCNR2R8 |
| Total capacity | 16 GB (2 × 8 GB) |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| Memory timings | 9-9-9 |
| ECC support | Yes |
| Buffer type | Unregistered |
| Memory rank | 2Rx8 |
| Heat spreader | Based on Current Inventory (If Required Please Contact) |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | Dell Poweredge T110 Ii Module |
| In the box | |
| Included items | 2 Memory RAM Sticks |
The box contains two 8 GB DDR3 ECC DIMMs for a total of 16 GB; no extra parts are needed to install them in a Dell PowerEdge T110 II.
This kit fills two of the four slots and reaches half the 32 GB maximum; add a second identical kit later if you need the full 32 GB.
The memory will run at 1333 MHz with CL9 timing at 1.5 V, delivering PC3‑10600 bandwidth for Xeon E3 series processors that require unregistered ECC.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?