We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Green circuit board with black memory chips, no heat spreader, 240-pin DDR3 DIMM

Computer Memory Solutions

Computer Memory Solutions CM10247210600ECCNR2R8 8GB DDR3 1333 ECC Unregistered DIMM memory upgrade

SKU CH-S5P7-TPX92

8GB DDR3 1333 ECC unregistered DIMM validated for Supermicro X9SCL and B9DRE server motherboards

  • Total capacity8 GB
  • Rated speedDDR3 1333 (PC3 10600)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL9
  • Memory timings9-9-9
  • Rated voltage1.5 V
  • 8GB capacity supports up to 32GB total system memory
  • ECC protection detects and corrects single-bit data errors
  • DDR3 1333 MHz speed matches PC3-10600 specification
  • Unregistered 240-pin DIMM fits Supermicro X9SCL and B9DRE boards
  • 5V operation reduces power draw and heat output

8GB DDR3 ECC DIMM for Supermicro servers

This 8GB DDR3 1333 module adds error-correcting memory to Supermicro X9SCL and B9DRE motherboards. It is built as a single unregistered DIMM for systems that require ECC without registered buffering. The kit contains one stick to fill an available slot. It targets administrators upgrading compatible server boards.

240-pin unregistered layout fits four-slot boards

The module uses a standard 240-pin DDR3 edge connector with no heat spreader. Unregistered signalling keeps the electrical load light on the memory controller. Four DIMM sockets on the supported boards allow a maximum of 32GB when all slots are populated. Major-brand DRAM chips are used throughout.

1.5V operation at CL9 9-9-9 timing

Rated at 1.5 volts, the stick runs at the standard DDR3 voltage for low power draw. CAS latency of nine cycles at 1333 MHz delivers predictable access times. No active cooling is required on the bare PCB. The module operates within normal server thermal limits.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $23.99
Cheaper than about 88% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $3.00 per GB
Cheaper than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM10247210600ECCNR2R8
Total capacity8 GB
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1333 (PC3 10600)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL9
Memory timings9-9-9
ECC supportYes
Buffer typeUnregistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsSupermicro MBd-X9Scl-F-B, X9Scl-F, B9Dre Motherboard
In the box
Included items1Memory Ram Stick

Questions about this item

What speed does the DDR3 1333 PC3-10600 interface run at in practice?

The module operates at 1333 MHz with a PC3-10600 data rate and CL9 9-9-9 timings at 1.5V.

Will this 240-pin DDR3 DIMM fit the four slots on my Supermicro X9SCL-F motherboard?

Yes, the 240-pin unregistered ECC DIMM matches the four DDR3 slots on the X9SCL-F, X9SCL-F-B and B9DRE boards supporting up to 32 GB total.

How do I install this CMS 8 GB stick and what step do people often miss?

Power off the server, open the chassis, align the notch on the 240-pin edge connector, press firmly until both retention clips click, then verify the full 8 GB appears in BIOS.

More in Model-Specific Memory Upgrades

Similar items