Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
A 32 GB kit of four 8 GB DDR3 ECC registered DIMMs running at 1333 MHz for Supermicro X8DTi and X8DTL server boards
This 32GB kit contains four 8GB DDR3 1333 ECC registered DIMMs built for Supermicro X8DTi-LN4F, X8DTL-3, X8DTL-6F and X8DTL-i platforms. It targets administrators upgrading or repairing dual-socket server boards that require registered memory with error correction. The modules operate at 1.5V with CL9 9-9-9 timings and use a 240-pin form factor.
Each supported motherboard offers eight DIMM sockets across two CPUs, organised as four banks of two per processor. The X8DTi-LN4F accepts up to 192GB total while the X8DTL-3, X8DTL-6F and X8DTL-i each support up to 96GB. This 32GB kit fills half the sockets on a fully populated dual-CPU X8DTi-LN4F or a single-CPU X8DTL system. Mixing registered and unbuffered ECC modules is not supported.
The memory controller on these Supermicro boards requires registered ECC DIMMs; unbuffered ECC or non-ECC modules will not function correctly. This kit provides exactly that registered ECC configuration at DDR3 1333 speed. Buyers whose boards demand unbuffered ECC or a different DDR generation cannot use this product.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM10247210600ECCR2R4H |
| Total capacity | 32 GB (4 × 8 GB) |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| Memory timings | 9-9-9 |
| ECC support | Yes |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | SUPERMICRO X8DTi-LN4F, X8DTL-3, X8DTL-6F, X8DTL-i |
| In the box | |
| Included items | 4 Memory RAM Sticks |
No, the board manual states mixing registered and unbuffered ECC is not supported; all slots must use registered modules like these.
Check the BIOS memory information screen or run CPU-Z; it should show DDR3-1333 at 9-9-9 timings and 1.5 V.
Only the four 240-pin DDR3 registered ECC DIMMs are supplied; no brackets, cables or additional hardware are included.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?