We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions CM128643200DIMM 2GB (2x1GB) DDR1 400MHz memory upgrade

SKU CH-CMW3-GJWB8

2GB dual-channel kit of DDR1 400MHz DIMMs for HP Business Desktop DX2000, DX2025, DX2030 and DX2090 systems

  • Total capacity2 GB (2 × 1 GB)
  • Rated speedDDR 400 (PC 3200)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL3
  • Memory timings3-3-3
  • Rated voltage2.6 V
  • Guaranteed compatibility with HP Dx2000, Dx2025, Dx2030, Dx2090 desktops
  • 2 GB total capacity delivered as a matched pair of 1 GB modules
  • DDR1 400 MHz speed with CL3 timing for responsive operation
  • 184-pin unbuffered non-ECC DIMM design fits standard desktop slots
  • Major-brand chipset components ensure reliable performance

HP Business Desktop DX2000 series upgrade

This 2 GB kit contains two 1 GB unbuffered DIMMs built for HP Business Desktop DX2000, DX2025, DX2030 and DX2090 systems. The modules run at DDR400 speed with CL3 timings and 2.6 V operation. They are designed as a direct memory upgrade for those specific desktops.

Installing the matched pair

The supplier notes that modules must be ordered and installed in pairs to enable dual-channel mode on these platforms. Each stick uses a standard 184-pin DDR SDRAM edge connector that fits the desktop's DIMM slots. No heat spreader is present, so clearance inside compact chassis is not affected.

DDR1 platform limits

The DDR1 interface tops out at 400 MHz with a maximum bandwidth defined by the PC3200 standard. Capacity per module is limited to 1 GB in this kit, so total memory cannot exceed the motherboard's supported maximum. Older chipsets also require paired population for dual-channel operation.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $21.99
Cheaper than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 2 GB (2 × 1 GB)
Lower than about 95% of the 20,941 comparable items (median 32 GB).
Price per GB $11.00 per GB
Pricier than about 55% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM128643200DIMM
Total capacity2 GB (2 × 1 GB)
Product type184-Pin DDR SDRAM
Performance
Rated speedDDR 400 (PC 3200)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL3
Memory timings3-3-3
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage2.6 V
Compatibility
Compatible systemsHp Business Desktop Dx2000 Dx2025, Dx2030, Dx2090
In the box
Included items2 Memory RAM Sticks

Questions about this item

How can I confirm the CM128643200DIMM kit is running at DDR400 after installing it in my DX2000?

Enter the BIOS on the DX2000 and verify the memory frequency shows 400 MHz with CL3 timing. The system should also report the full 2 GB capacity across both slots.

What exactly ships with the CM128643200DIMM package and do I need any extra parts for my DX2025?

The box contains two 1 GB 184-pin DDR1 DIMMs. No additional modules or accessories are required for the DX2025; install the pair in matching slots for dual-channel operation.

Which capacity version of this CMS memory should I choose for a DX2090 that supports up to 4 GB?

This 2 GB kit (2 x 1 GB) is the correct version for the DX2090. It fills two of the four slots and leaves room for a second identical kit if you later want the maximum 4 GB.

More in Model-Specific Memory Upgrades

Similar items