Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 GB kit of four 16 GB DDR4 2666 MHz CL19 unbuffered DIMMs validated for Dell OptiPlex 7060 SFF, Tower and XE3 Tower
This 64GB kit contains four 16GB DDR4 DIMMs rated at 2666MHz with CL19 timings. It is built for Dell OptiPlex 7060 SFF, Tower and OptiPlex XE3 Tower systems that accept standard 288-pin unbuffered memory.
The kit fills all four memory sockets on the supported OptiPlex platforms, delivering the maximum 64GB capacity those boards allow. Each module runs at 1.2V and uses a 2Rx8 organisation, so the CPU memory controller sees a consistent load across every channel.
Computer Memory Solutions packages the four sticks as a single kit to avoid timing mismatches that can occur when mixing loose modules. The maker states that all parts are manufactured in-house rather than sourced from generic stock, and they provide a lifetime exchange or repair warranty against manufacturing defects.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM2048642666DIMM |
| Total capacity | 64 GB (4 × 16 GB) |
| Product type | 288-Pin DDR4 SDRAM |
| Performance | |
| Rated speed | DDR4 2666 (PC4 21300) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL19 |
| Memory timings | 19-19-19 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.2 V |
| Compatibility | |
| Compatible systems | Dell OptiPlex 7060 Small Form Factor (SFF), OptiPlex 7060Tower, OptiPlex XE3 Tower |
| In the box | |
| Included items | 4 Memory RAM Sticks |
The kit is rated for CL19 at 1.20V, so the modules run at DDR4 2666 within standard JEDEC limits; sustained workloads stay at that speed and voltage unless the platform applies a lower multiplier.
Each 16GB stick operates at 1.20V without a heat spreader; typical DDR4 power at this voltage is low, so case airflow in the OptiPlex 7060 SFF or Tower is usually sufficient for continuous operation.
Yes — the kit fills all four DIMM sockets (4 × 16GB) and requires a processor and chipset that run DDR4 at 2666MHz; the listed OptiPlex 7060 SFF, 7060 Tower and XE3 Tower meet that requirement.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?