We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR4 DIMM modules, no heat spreaders

Computer Memory Solutions

Computer Memory Solutions CM2048722400ECCNR 64GB (4x16GB) DDR4 2400 ECC Unregistered DIMM memory upgrade

SKU CH-NGWH-03ZWF

64GB kit of four 16GB DDR4 2400 ECC unregistered DIMMs validated for Dell PowerEdge T30, T330 and Storage NX430

  • Total capacity64 GB (4 × 16 GB)
  • Rated speedDDR4 2400 (PC4 19200)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL17
  • Memory timings17-17-17
  • Rated voltage1.2 V
  • 64 GB total capacity with four 16 GB modules
  • DDR4 2400 speed rated at PC4 19200
  • ECC unregistered design for data integrity
  • CL17 17-17-17 timings at 1.2 V
  • Validated for Dell PowerEdge T30, T330, NX430

64GB ECC DDR4 Kit for Dell PowerEdge Servers

This 64GB kit contains four 16GB DDR4 2400 unregistered ECC DIMMs built for Dell PowerEdge T30, T330 and Storage NX430 systems. It targets administrators who need the full 64GB maximum capacity these platforms support. Buyers who require registered or load-reduced modules cannot use this kit.

288-Pin Unbuffered DIMMs with Major Brand Chips

Each module is a 288-pin 2Rx8 DIMM running at 1.2V with CL17 17-17-17 timings and no heat spreader. The unregistered design fits the four native memory slots in the compatible Dell servers without requiring registered memory support. Systems that only accept registered DIMMs will not post with these modules.

Verify Slot Count and Maximum Capacity Before

The supported platforms provide exactly four DIMM slots and a 64GB memory ceiling, so this kit fills every slot to the limit. Confirm that your motherboard revision accepts unregistered ECC DDR4 and that no BIOS restriction lowers the usable capacity. Machines needing more than 64GB or a different module rank configuration are not served by this product.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $435.99
Typical for this category: the median of 21,161 items is $397.99.
Total capacity 64 GB (4 × 16 GB)
Higher than about 60% of the 20,941 comparable items (median 32 GB).
Price per GB $6.81 per GB
Cheaper than about 58% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM2048722400ECCNR
Total capacity64 GB (4 × 16 GB)
Product type288-Pin DDR4 SDRAM
Performance
Rated speedDDR4 2400 (PC4 19200)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL17
Memory timings17-17-17
ECC supportYes
Buffer typeUnregistered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.2 V
Compatibility
Compatible systemsDell Poweredge T30, Poweredge T330, Storage NX430
In the box
Included items4 Memory RAM Sticks

Questions about this item

What DDR4 speed does the CM2048722400ECCNR kit run at and what bandwidth does that provide?

The kit operates at 2400 MHz, delivering PC4-19200 bandwidth across all four modules.

What physical slot type and form factor must the server provide for these modules?

Each 16 GB stick is a 288-pin DDR4 DIMM; the system needs four such slots.

How should the four sticks be installed in a PowerEdge T30 or T330 and what common mistake should be avoided?

Populate all four DIMM slots with the matched 16 GB modules; do not mix them with other capacities or speeds.

More in Model-Specific Memory Upgrades

Similar items