Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Registered DDR2 400 ECC kit with two 2 GB modules for Dell PowerEdge SC1425 servers
This 4 GB kit contains two 2 GB registered ECC DIMMs built for the Dell PowerEdge SC1425 server. Each module uses a 240-pin DDR2 interface running at 400 MHz with CL3 timing. The dual-rank design matches the platform requirement that additional memory be installed in pairs.
Registered buffering reduces electrical load on the memory controller during continuous server workloads. ECC circuitry detects and corrects single-bit errors without halting the system. Dual-rank organisation allows the chipset to interleave accesses across ranks for steadier throughput under prolonged demand.
Modules operate at the standard 1.8 V for DDR2 with no heat spreaders attached. Passive cooling relies on chassis airflow, so noise contribution is limited to the server fans already present. Power draw scales with the two populated slots and stays within the platform’s designed envelope.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM256723200ECCREG2R4 |
| Total capacity | 4 GB (2 × 2 GB) |
| Product type | 240-Pin DDR2 SDRAM |
| Performance | |
| Rated speed | DDR2 400 (PC2 3200) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL3 |
| Memory timings | 3-3-3 |
| ECC support | No |
| Buffer type | Registered |
| Memory rank | 2Rx4 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.8 V |
| Compatibility | |
| Compatible systems | Dell Poweredge Sc1425 (1425Sc |
| In the box | |
| Included items | 2 Memory RAM Sticks |
The modules operate at 1.8 volts and use registered signalling to reduce electrical load on the memory controller, keeping heat output low enough for standard server airflow in the SC1425 chassis.
The system needs a motherboard that accepts 240-pin DDR2 registered ECC memory and a BIOS that supports dual-rank 2Rx4 modules; the first slot can be filled singly, but any further memory must be added in matched pairs.
Yes — all modules must run at the same 400 MHz speed and CL3 timing, so the memory controller will down-clock everything to the slowest common setting, preserving stability within the eight-rank limit of the chipset.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?