Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
64 MB PC133 SO-DIMM upgrade for Akai MPC500, MPC1000 and MPC2500 samplers
This 64 MB SDR SO-DIMM runs at 133 MHz on a 144-pin interface. It is built as a direct memory upgrade for the Akai MPC500, MPC1000 and MPC2500 samplers. The module is unbuffered, non-ECC and uses major-brand chips. It suits owners of those instruments who need to expand sample memory within the factory slot limit.
The stick has no heat spreader and draws only the standard power for a PC133 SO-DIMM. Passive cooling inside the MPC chassis is sufficient; no active airflow or extra voltage is required. Operation stays silent because there are no moving parts on the module itself.
This module replaces the factory-fitted memory or adds a second stick where the sampler has a free slot. The jump is worthwhile when projects exceed the original memory ceiling and samples must be truncated. It does not help users who need more than the machine’s maximum supported capacity or who require ECC or registered memory.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM256PC133SO8 |
| Total capacity | 64 MB |
| Product type | 144-Pin SDR SO-DIMM |
| Performance | |
| Rated speed | PC 133 |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| ECC support | No |
| Buffer type | Unbuffered |
| Heat spreader | No |
| Compatibility | |
| Compatible systems | Akai Mpc500, Mpc1000, Mpc2500 |
| In the box | |
| Included items | 1 Memory RAM Stick |
Power off the unit, remove the bottom cover, align the notch on the module with the slot key, press the stick in firmly until both side clips snap shut, then replace the cover. The step most often missed is pushing hard enough to fully engage both clips.
No routine maintenance is required; the unbuffered SDRAM has no moving parts or batteries. Replacement is only necessary if a memory error appears or you upgrade to a larger capacity stick.
The 64 MB capacity fills well before the 133 MHz bus saturates, so the practical limit is total sample memory, not bandwidth.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?