Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Two 4 GB DDR3 modules at 1333 MHz CL9 for HP/Compaq Business Pro 3500 and 3505 Microtower systems
This 8GB kit contains two 4GB unbuffered DIMMs built to the DDR3 1333 standard with CL9 timing. It is designed specifically for the HP/Compaq Business Pro 3500 and Business Pro 3505 Microtower systems. The modules run at 1.5V and use a 240-pin layout with 2Rx8 organisation. Buyers who need ECC error correction or registered modules cannot use this kit.
The PC3 10600 interface caps theoretical bandwidth at the DDR3 1333 data rate, so throughput cannot exceed what the memory controller and chipset allow on these platforms. Both supported systems only provide two DIMM sockets and a maximum memory limit of 8GB, so this kit fills every available slot. Builders who want more capacity or faster speeds must change the platform entirely.
Most units shipped with 4GB or 6GB across the two slots, so this matched pair doubles or completes the memory to the 8GB ceiling. The jump is worth it when multitasking causes heavy paging or when the integrated graphics share system memory. If the system already runs 8GB, this kit adds no usable capacity.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM5126410600DIMM |
| Total capacity | 8 GB (2 × 4 GB) |
| Product type | 240-Pin DDR3 SDRAM |
| Performance | |
| Rated speed | DDR3 1333 (PC3 10600) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL9 |
| Memory timings | 9-9-9 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 2Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.5 V |
| Compatibility | |
| Compatible systems | Hp/Compaq Business Pro 3500, Business Pro 3505 Microt |
| In the box | |
| Included items | 2 Memory RAM Sticks |
The 2×4 GB kit fills both DIMM slots on the Business Pro 3500 and 3505 Microtower, enabling dual-channel operation for higher memory bandwidth than a single module.
PC3-10600 indicates a peak transfer rate of 10 600 MB/s at 1333 MHz; real-world throughput will be slightly lower due to latency and controller overhead.
The 240-pin DDR3 interface supports up to 1333 MHz on this platform; the memory controller in the Business Pro 3500/3505 caps operation at that frequency.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?