We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions CM5126412800DIMM 4GB DDR3 1600MHz Prodesk 600 G1 Sff Tower memory upgrade

SKU CH-CQY7-8CEFT

4GB DDR3 1600MHz unbuffered DIMM for HP ProDesk 600 G1 SFF and Tower systems

  • Total capacity4 GB
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Memory timings11-11-11
  • Rated voltage1.5 V
  • 4GB DDR3 1600MHz boosts ProDesk 600 G1 responsiveness
  • CL11 1.5V unbuffered DIMM installs without configuration
  • 240-pin non-ECC module matches HP factory spec
  • Single 4GB stick leaves three slots free for expansion
  • CMS lifetime warranty backs guaranteed compatibility

HP ProDesk 600 G1 SFF/Tower memory upgrade

This 4 GB DDR3 module is built specifically for HP ProDesk 600 G1 Series small-form-factor and tower desktops. It installs as a single 240-pin DIMM running at 1600 MHz with CL11 timing and 1.5 V operation. The unbuffered, non-ECC design matches the factory specification for these business PCs.

Suited for owners adding capacity to a supported

Buyers who need ECC error correction, registered modules, or speeds beyond DDR3 1600 should look elsewhere. The kit contains only one 4 GB stick, so systems requiring a matched pair for dual-channel operation will need a second identical module. Maximum platform memory is 32 GB across four slots.

Sustained workload behaviour

The module operates at the standard 1.5 V without a heat spreader, relying on case airflow for cooling during extended use. HP documentation notes the memory bus runs at 1066 MHz regardless of module rating, so bandwidth under continuous load reflects that lower bus speed. Stability is maintained through the validated CL11 11-11-11 timing profile.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 96% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $3.00 per GB
Cheaper than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM5126412800DIMM
Total capacity4 GB
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Memory timings11-11-11
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsHp/Compaq Prodesk 600 G1 Series Sff/Tower
In the box
Included items1 Memory RAM Stick

Questions about this item

Does this 240-Pin DDR3 module require a free DIMM slot on an HP ProDesk 600 G1 SFF or Tower motherboard?

Yes, the module fits a standard 240-Pin DDR3 DIMM slot. The ProDesk 600 G1 SFF and Tower each provide four such slots, so at least one must be empty for installation.

If I keep existing DDR3-1333 or DDR3-1066 modules, will this 1600 MHz stick run at the slower speed?

The system memory bus operates at 1066 MHz regardless of module rating. Any faster module, including this 1600 MHz part, will downclock to match the bus speed when mixed with slower modules.

How can I confirm the 4 GB module is recognised after installation?

Enter the system BIOS or open the operating system memory information screen; both should report the additional 4 GB, raising total installed memory toward the 32 GB maximum supported by the platform.

More in Model-Specific Memory Upgrades

Similar items