We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions CM5126412800DIMM 8GB (2x4GB) DDR3-1600 CL11 memory upgrade

SKU CH-KT8K-D4R87

Dual-channel 8 GB DDR3-1600 CL11 kit validated for ASRock 970 Extreme 3 and Extreme4 boards

  • Total capacity8 GB (2 × 4 GB)
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Memory timings11-11-11
  • Rated voltage1.5 V
  • 8 GB total capacity in a 2 × 4 GB kit
  • DDR3 1600 MHz speed rated at PC3 12800
  • CL11 latency with 11-11-11 timings at 1.5 V
  • Guaranteed compatibility with ASRock 970 Extreme 3 and Extreme 4 boards
  • Unbuffered non-ECC 240-pin DIMMs using major brand chips

Targeted upgrade kit

This 8 GB kit contains two 4 GB DDR3-1600 modules built to match ASRock 970 Extreme 3 and 970 Extreme4 motherboards. Each stick runs at 1.5 V with CL11 11-11-11 timings and uses unbuffered non-ECC 240-pin DIMMs. The dual-channel pair suits owners of those boards who need a straightforward capacity increase.

Compatibility assurance

Computer Memory Solutions validates every module against the listed ASRock models so the kit installs without manual voltage or timing changes. The pack includes only the two memory sticks; no extra cables, brackets or software are supplied. Builders who want RGB lighting, heat spreaders or ECC error correction will not find those features here.

Everyday fit

Standard-height 240-pin DIMMs slot directly into the four DDR3 sockets on the target boards, leaving clearance for most CPU coolers. Major-brand chips and a limited lifetime warranty from the manufacturer back long-term reliability. Systems that require registered memory, higher frequencies than 1600 MHz or capacities beyond 64 GB total are not supported by this kit.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $21.99
Cheaper than about 89% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB (2 × 4 GB)
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $2.75 per GB
Cheaper than about 91% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM5126412800DIMM
Total capacity8 GB (2 × 4 GB)
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Memory timings11-11-11
ECC supportNo
Buffer typeUnbuffered
Memory rank1Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsASRock Motherboard 970 Extreme 3, 970 Extreme4
In the box
Included items2 Memory RAM Sticks

Questions about this item

Will the 240-pin DDR3 modules need any replacement over time?

The kit contains two unbuffered non-ECC DIMMs rated for 1.5 V with a limited lifetime warranty from the manufacturer, so no scheduled replacement is required.

What speed ceiling appears first when the memory runs continuously at DDR3-1600 CL11?

The modules operate at 1600 MHz with 11-11-11 timings at 1.5 V; sustained loads stay within that rated frequency and voltage envelope.

How much heat or noise do the two 4 GB sticks produce during all-day use?

Without heat spreaders the DIMMs rely on case airflow, draw only 1.5 V each, and have no moving parts, so they add negligible heat and zero noise.

More in Model-Specific Memory Upgrades

Similar items