We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions CM5126412800DIMMHDR 4GB DDR3 1600MHz CL11 1.5V 240-Pin DIMM

SKU CH-N2SE-PX521

A 4GB DDR3-1600 non-ECC DIMM built for the HP Compaq Elite 8300 Microtower PC

  • Total capacity4 GB
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Memory timings11-11-11
  • Rated voltage1.5 V
  • 4GB capacity adds responsive multitasking headroom
  • DDR3 1600MHz speed matches system bus timing
  • CL11 1.5V timing keeps power draw low
  • 240-pin DIMM fits Elite 8300 Microtower slots
  • Unbuffered non-ECC design suits desktop workloads

4GB DDR3 Upgrade for HP Elite 8300

This 4 GB DDR3 module runs at 1600 MHz with CL11 timing and 1.5 V. It is built as a single 240-pin unbuffered DIMM using major-brand chips in a 2Rx8 configuration. The stick is designed specifically for the HP Compaq Elite 8300 Microtower PC (ENERGY STAR) and carries the vendor's lifetime warranty.

DDR3 Speed and Capacity Limits

The DDR3-1600 interface caps transfer rates at PC3-12800 bandwidth. A 32-bit operating system can address only 4 GB total, while a 64-bit OS allows the platform maximum of 16 GB across four sockets. Non-ECC unbuffered operation means no error correction or registered signalling is available.

Simple Slot Installation

Installation requires aligning the 240-pin key with the motherboard slot and pressing until the retention clips click. The only common issue is mixing this non-ECC stick with ECC or registered modules, which prevents the system from posting. Verify the OS architecture to reach the intended capacity.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $11.99
Cheaper than about 96% of the 21,161 comparable items (median $397.99).
Total capacity 4 GB
Lower than about 90% of the 20,941 comparable items (median 32 GB).
Price per GB $3.00 per GB
Cheaper than about 90% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM5126412800DIMMHDR
Total capacity4 GB
Product type240-Pin DDR3 SDRAM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Memory timings11-11-11
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsHp Compaq Elite 8300 Microtower Pc (Energy Star)
In the box
Included items1 Memory RAM Stick

Questions about this item

Should I pick this single 4 GB module or look for a larger kit?

The stick provides 4 GB in one 240-pin DDR3 module; the Elite 8300 Microtower has four slots and supports up to 16 GB with a 64-bit OS, so you can add more identical sticks later.

What does the 1600 MHz rating actually deliver inside the Elite 8300?

The module runs at DDR3-1600 (PC3-12800) with CL11 11-11-11 timings at 1.5 V, giving the standard throughput and latency the platform expects for everyday workloads.

Does the 240-pin DDR3 interface limit anything on this HP system?

The 240-pin DDR3 DIMM fits the Elite 8300's four unbuffered non-ECC slots; the board's memory controller caps total capacity at 16 GB, so the interface itself is not the bottleneck.

More in Model-Specific Memory Upgrades

Similar items