We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in

Computer Memory Solutions

Computer Memory Solutions CM5126412800SODRH 8GB (2x4GB) DDR3 1600MHz SODIMM for Sony Vaio VPCEE memory upgrade

SKU CH-7KWB-11AY9

8GB dual-channel DDR3 SODIMM kit rated at 1600 MHz with CL11 timing for compatible Sony Vaio VPCEE notebooks

  • Total capacity8 GB (2 × 4 GB)
  • Rated speedDDR3 1600 (PC3 12800)
  • ChipsetMajor Brand Chipset
  • CAS latencyCL11
  • Memory timings11-11-11
  • Rated voltage1.5 V
  • 8 GB total capacity for multitasking headroom with 2 x 4 GB modules
  • DDR3 1600 MHz speed matches PC3 12800 standard for responsive performance
  • CL11 latency and 1.5 V operation keep power draw low
  • 204-pin SODIMM form factor fits Sony Vaio VPCEE series laptops
  • Unbuffered non-ECC design installs directly in both memory slots

Sony Vaio VPCEE DDR3 1600MHz SO-DIMM kit

This 8 GB kit contains two 4 GB DDR3 1600 MHz SO-DIMM modules built for Sony Vaio VPCEE series notebooks. The sticks run at 1.5 V with CL11 11-11-11 timings and use unbuffered non-ECC chips on a 204-pin PCB. Computer Memory Solutions validates compatibility with the VPCEE2M1E, VPCEE2S1E, VPCEE31FX and VPCEE32FX models.

Who should buy and who should not

Owners of the listed Vaio VPCEE laptops who need the maximum 8 GB the platform allows will reach that ceiling with this kit. Buyers whose machines require ECC or registered memory cannot use these unbuffered non-ECC modules. Systems limited to DDR3 1066 speeds will still run the memory but at the lower frequency.

Deciding specification — 204-pin DDR3 1600 SO-DIMM

The modules are 204-pin DDR3 SO-DIMMs rated at 1600 MHz (PC3-12800) with a 1.5 V operating voltage. If the target notebook accepts DDR3 SO-DIMMs at this speed and voltage the kit will install and operate at the rated CL11 timings. Any other DDR generation or pin count will not fit the slot.

How it compares

Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.

Price $19.99
Cheaper than about 91% of the 21,161 comparable items (median $397.99).
Total capacity 8 GB (2 × 4 GB)
Lower than about 80% of the 20,941 comparable items (median 32 GB).
Price per GB $2.50 per GB
Cheaper than about 92% of the 20,941 comparable items (median $8.19 per GB).

New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.

Specifications

Product
Brand nameComputer Memory Solutions
Model nameCM5126412800SODRH
Total capacity8 GB (2 × 4 GB)
Product type204-Pin DDR3 SO-DIMM
Performance
Rated speedDDR3 1600 (PC3 12800)
Processor
ChipsetMajor Brand Chipset
Memory
CAS latencyCL11
Memory timings11-11-11
ECC supportNo
Buffer typeUnbuffered
Memory rank2Rx8
Heat spreaderNo
Power
Rated voltage1.5 V
Compatibility
Compatible systemsSony Vaio Vpcee2M1E, Vpcee2S1E, Vpcee31Fx, Vpcee32Fx
In the box
Included items2 Memory RAM Sticks

Questions about this item

Will these 1.5 V CL11 modules run in my Vaio VPCEE that originally shipped with 1.35 V DDR3-1066 sticks?

The kit is rated at 1.5 V and CL11 at 1600 MHz; the laptop will clock them down to the board's supported 1066 MHz, but the higher voltage may exceed the original 1.35 V spec.

How can I confirm both 4 GB sticks are recognised at 1600 MHz after installation?

Open Task Manager or CPU-Z and verify the memory tab shows 8 GB total running at 800 MHz (DDR3-1600 effective) with 11-11-11 timings.

Does the package include only the two SODIMM sticks or any tools or adapters?

The box contains exactly two 204-pin DDR3 SODIMM modules; no screwdriver, bracket or adapter is supplied.

More in Model-Specific Memory Upgrades

Similar items