Crucial CT2K8G3S160BM 16GB (2 x 8GB) DDR3 1600 SO-DIMM memory upgrade
- 16 GB (2 × 8 GB)
- DDR3 1600
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
4 GB DDR3L 1600 CL11 SO-DIMM upgrade for HP All-in-One 18-5010, 18-5021, 18-5110 and 18-5202la
This 4 GB module is built for HP All-In-One models 18-5010, 18-5021, 18-5110 and 18-5202La. It suits owners who need a straightforward capacity increase on supported platforms.
The stick uses the 204-pin SO-DIMM form factor and runs at 1.35 V with CL11 timing. Two sockets are present in the chassis, so this single module leaves the second slot open for a future addition.
It matches the system DDR3L 1600 specification and lifts total memory toward the 16 GB maximum. Buyers who need ECC, registered modules or a different voltage should look elsewhere.
Measured against everything we stock in Model-Specific Memory Upgrades, at today’s prices. Recalculated every night.
New to this? Buying memory and SSDs with crypto — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | Computer Memory Solutions |
| Model name | CM5126412800SOSRL |
| Total capacity | 4 GB |
| Product type | 204-Pin DDR3 SO-DIMM |
| Performance | |
| Rated speed | DDR3L 1600 (PC3L 12800) |
| Processor | |
| Chipset | Major Brand Chipset |
| Memory | |
| CAS latency | CL11 |
| Memory timings | 11-11-11 |
| ECC support | No |
| Buffer type | Unbuffered |
| Memory rank | 1Rx8 |
| Heat spreader | No |
| Power | |
| Rated voltage | 1.35 V |
| Compatibility | |
| Compatible systems | Hp All-In-One 18-5010, 18-5021, 18-5110, 18-5202La |
| In the box | |
| Included items | 1 Memory RAM Stick |
The module runs at the standard 1.35V DDR3L voltage with CL11 11-11-11 timings, matching the HP All-in-One 18-5010 and 18-5110 specifications for continuous operation.
With no heat spreader and a low 1.35V unbuffered design, the 1Rx8 module generates minimal heat and zero noise during extended use in compatible HP All-in-One 18-5021 systems.
This CM5126412800SOSRL module is guaranteed compatible with HP All-in-One 18-5010, 18-5021, 18-5110 and 18-5202La systems that accept 204-pin DDR3L 1600 memory.
More in Model-Specific Memory Upgrades
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?