Condor 1FAZ2 Raincoat Yellow S 45 in 42 in chest .46 mm
Yellow knee-length raincoat in SBR material with snap closure, two outside pockets and chemical resistance, 45 in long for a 42 in chest at 0.46 mm thickness
- Knee-length coverage protects lower body with 45 in length
- Snap front closure allows quick donning and doffing
- Two outside pockets keep essentials accessible
- SBR material resists chemicals in harsh environments
- Fits 42 in chest with .46 mm thickness
Condor SBR raincoat for chemical splash protection
This unisex yellow raincoat uses 0.46 mm SBR material that resists chemical splashes. It fits a 42 in maximum chest and reaches 45 in to the knee. Two outside pockets and snap-front closure allow quick donning over workwear.
Capacity and headroom for wet work
The 42 in chest and knee-length cut cover the torso and upper legs while leaving room for layered clothing. Open cuffs and no hood mean wrists and head stay exposed, so the coat runs out when full overhead or wrist sealing is required.
0.46 mm SBR thickness decides chemical suitability
At 0.46 mm the SBR shell provides a lightweight barrier against incidental splashes but is not rated for immersion or high-pressure streams. Buyers needing heavier gauge or certified permeation data must select a different garment.
How it compares
Measured against everything we stock in Face Masks, Respirators & PPE, at today’s prices. Recalculated every night.
- Price $60.99
- Pricier than about 76% of the 5,612 comparable items (median $24.99).
Specifications
| Product | |
|---|---|
| Brand name | CONDOR |
Questions about this item
Will the 42 in chest measurement fit over my existing work jacket?
The raincoat is cut to a 42 in maximum chest size, so it will accommodate a mid-weight jacket underneath without restricting movement.
How can I verify the snap front closure is sealing properly after I put it on?
Fasten every snap from neck to hem; the front should lie flat with no gaps and the 45 in length should fall to the knee as specified.
Does the package include a hood or liner, or must I buy them separately?
The coat ships without a hood or removable liner; both are absent from the specification, so any head or thermal coverage must be sourced separately.
More in Face Masks, Respirators & PPE
Similar items
MSA 91585 Comfo-Cap Hard Hat Polycarbonate Staz-On Type 1 Class G personal protective equipment
- HAWA





