We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Short grey cable with straight Mini-HDMI plug and right-angled Micro-HDMI connector, screw thread visible

Connex by Amimon

Connex by Amimon 50cm Mini-HDMI to Right-Angled Micro-HDMI Cable (Reversed/GoPro) Drone Accessory

SKU CH-Y790-YXT19

50 cm Mini-HDMI to right-angled Micro-HDMI cable with screw lock for secure Air Unit Transmitter and GoPro connections

  • 50 cm length gives flexible Air Unit placement
  • right-angled Micro-HDMI fits tight spaces on GoPro
  • screw-lock Mini-HDMI prevents accidental disconnects in flight
  • reversible Micro-HDMI orientation eases blind mating
  • compact cable reduces weight and snag risk on drone

Drone accessory cable

The Connex by Amimon cable connects an Air Unit Transmitter to a GoPro using a Mini-HDMI plug with a securing screw and a right-angled Micro-HDMI end. The 50cm length gives enough slack for flexible mounting while keeping the run short enough to avoid snagging on frame parts. It is built for the vibration and movement of regular flight operations.

Replaces generic HDMI leads

Standard straight cables often protrude too far from the camera body and lack a locking mechanism, so they work loose under propeller wash or hard landings. This cable is worth fitting when the camera sits close to the frame or points away from the pilot, because the right-angle Micro-HDMI and screw-on Mini-HDMI stay seated in tight bays.

Mini-HDMI and Micro-HDMI limits

Both connectors are rated for standard consumer HDMI bandwidth and are not designed for repeated mating cycles in dusty or wet environments. The screw thread only engages the Mini-HDMI side, so the Micro-HDMI end relies on friction alone and can back out if the airframe flexes sharply. The 50cm length also prevents routing the transmitter far from the camera.

How it compares

Measured against everything we stock in Drone Payloads & Add-On Gear, at today’s prices. Recalculated every night.

Price $28.99
Cheaper than about 60% of the 419 comparable items (median $36.99).

Specifications

No published specifications for this item yet.

Questions about this item

Will the 50 cm cable reach from my Air Unit Transmitter to the GoPro mount without pulling tight?

The 50 cm length gives enough slack for typical transmitter-to-camera spacing on a drone frame while keeping the run short enough to avoid snagging on props or landing gear.

How do I secure the Mini-HDMI end so it does not vibrate loose during flight?

Tighten the captive screw on the Mini-HDMI connector by hand until the plug seats firmly; the screw threads into the transmitter port and prevents the cable from working free under vibration.

The right-angled Micro-HDMI plug sits flush against my GoPro body — will repeated mating wear the port out?

The angled Micro-HDMI head is rated for normal insert-cycle life; if the port ever feels loose, replace the cable rather than forcing the connection.

More in Drone Payloads & Add-On Gear

Similar items