Cooler Master Hyper 212 Halo Black CPU Cooler RR-S4KK-20PA-R1
- 120 mm
- Black
We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.
Twin-tower air cooler with six heatpipes, dual 120 mm RGB fans and a wired controller for broad socket compatibility
The Cooler Master MA620P is a twin-tower air cooler built on the Hyper 212 design with double the heat dissipation. It uses six heatpipes with Continuous Direct Contact Technology 2.0 and two 120mm RGB MasterFans. The unit stands 158 mm tall and weighs 850 g. It fits a wide range of Intel and AMD sockets.
This cooler suits builders who want RGB lighting and strong air cooling for mainstream or enthusiast CPUs on supported Intel LGA and AMD platforms. The 158 mm height and twin-tower width require a case with sufficient clearance. Buyers needing a low-profile cooler for small-form-factor cases or liquid cooling for extreme overclocks should look elsewhere.
The maximum cooler height is 158 mm, which determines whether the MA620P fits inside your chassis. Measure the available CPU cooler clearance in your case before purchase. If the case allows less than 158 mm, this cooler cannot be installed.
Measured against everything we stock in CPU Coolers & Heatsink Fans, at today’s prices. Recalculated every night.
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
| Product | |
|---|---|
| Brand name | COOLER MASTER |
| Product line | MasterAir MA620P |
| Model name | MAP-D6PN-218PC-R1 |
| Product color | Black |
| Product type | Fan & Heatsinks |
| Performance | |
| Rotational speed | 600–1,800 RPM (PWM) +/- 10% |
| Airflow rate | 53.4 CFM (Max) |
| Power | |
| Power input connector | 4-Pin (PWM) |
| Size & build | |
| Fan size | 120 mm |
| Cooler material | 6 Heatpipes / CDC 2.0 / Aluminum Fins |
| Fan mounting | Vertical |
| Heatsink dimensions | 116 × 110.1 × 158.4 mm (4.6 in × 4.3 in × 6.2 in) |
| Product weight | 850g (1.87 lb) |
| Shipping weight | 1.56 kg |
| Package size | 231 × 178 × 161 mm |
| Compatibility | |
| Supported CPU sockets | Intel LGA 2066 / 2011-v3 / 2011 / 1366 / 1156 / 1155 / 1151 / 1150 / 775 AMD Socket AM4 / AM3+ / AM3 / AM2+ / AM2 / FM2+ / FM2 / FM1 |
| CPU cooler height limit | 158 mm |
| Environment & compliance | |
| Operating noise | 31 dBA (Max) |
| More details | |
| LED lighting | RGB |
It supports Intel LGA 2066, 2011‑v3, 2011, 1366, 1156, 1155, 1151, 1150, 775 and AMD AM4, AM3+, AM3, AM2+, AM2, FM2+, FM2, FM1.
Yes, the fans accept 4‑pin PWM control from 600 to 1,800 RPM and will scale down to the header's minimum.
The fans should spin up to 1,800 RPM under load, stay below 31 dBA at idle, and the C10L lets you cycle 7 colours, 5 brightness levels and 6 preset effects without motherboard software.
More in CPU Coolers & Heatsink Fans
What you pay in, and what you read prices in.
Sent from your wallet at checkout
Display only — the catalogue is priced in USD
No currency matches that.
New here?
Already have one?
There is no automatic reset: this shop sends no mail, so there is no one-time link to ask for. Leave the address on the account and it gets picked up by hand.
Request noted
Nothing is on its way to your inbox — this shop sends no mail at all. Someone picks these up by hand.
Remembered it?