We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Half-height PCIe adapter board with M.2 slots and gold edge connector

Corn Electronics

Corn Electronics JEYI SK6 Half High M.2 NVMe & NGFF to PCI-E 3.0 x4 Adapter

SKU CH-9BZQ-Q148X

Converts M.2 NVMe and SATA SSDs to a PCIe 3.0 x4 slot with adjustable lengths and tantalum capacitors

  • Supports multiple M.2 lengths including 2230, 2242, 2260, 2280 and 110mm
  • Tantalum capacitors protect the installed SSD from power fluctuations
  • Half-height bracket fits low-profile chassis and standard slots
  • PCIe 3.0 x4 interface delivers up to 8 GB/s bandwidth
  • Driver-free installation works immediately with NVMe and SATA M.2 drives

Half-High M.2 Adapter

The Corn Electronics JEYI SK6 is a half-height PCIe 3.0 x4 add-in card that converts M.2 NVMe (M-Key) and NGFF (B-Key) solid-state drives for desktop use. It targets builders upgrading systems with spare expansion slots but no onboard M.2 connector.

Supported Lengths and Speed

The card accepts five module lengths: 2230, 2242, 2260, 2280 and 110 mm. Tantalum capacitors protect the installed drive, while the PCIe 3.0 x4 electrical interface delivers up to 8 GB/s bandwidth for NVMe devices.

Interface Limits

NVMe SSDs operate at full PCIe 3.0 x4 speed without drivers. B-Key NGFF drives are routed to a SATA connection instead, limiting them to the SATA interface maximum throughput. The half-high bracket may not fit low-profile cases.

How it compares

Measured against everything we stock in PCIe Expansion Cards, at today’s prices. Recalculated every night.

Price $26.99
Cheaper than about 57% of the 891 comparable items (median $30.99).

New to this? Buying PC parts with Monero — what to check, what it costs to pay, and what is never asked for.

Specifications

No published specifications for this item yet.

Questions about this item

Will the JEYI SK6 fit in a half-height PCIe 3.0 x4 slot on an older motherboard?

Yes, the card is half-height and uses a PCIe 3.0 x4 interface, so it installs in any standard PCIe x4, x8 or x16 slot on older boards.

How can I confirm the adapter is running at PCIe 3.0 x4 speed after installing an NVMe drive?

Check the link width and generation in your motherboard BIOS or use a system tool such as GPU-Z; it should report PCIe 3.0 x4 for the NVMe device.

Does the package include mounting screws for 2230, 2242, 2260 and 2280 drives, or must I buy them separately?

The card provides five adjustable standoff positions (including 110 mm) that cover 2230, 2242, 2260 and 2280 lengths; screws are included so no separate purchase is needed.

More in PCIe Expansion Cards

Similar items