Corn Electronics S-Video to VGA Converter Box Black
Converts S-Video, RCA or VGA sources to a VGA monitor at up to 1280 x 1024 resolution with on-screen controls
- Product typeS-Video to Composite
- Product colorBlack
- Overall length1 in - 5 in
- Plug-and-play setup with no driver installation required
- Switch between S-Video, RCA and VGA sources via front button
- Outputs up to 1280 x 1024 resolution for clear display
- Auto-detects PAL or NTSC video standards automatically
- Adjust brightness, contrast, saturation and hue with on-screen menu
S-Video and Composite to VGA Converter
This compact box accepts S-Video, RCA composite and VGA sources and outputs a VGA signal for monitors or projectors. It is intended for users connecting legacy devices such as DVD players, DVRs or older PCs to a VGA display. Plug-and-play operation requires no driver installation.
Passive Operation With No Fan Noise
The unit draws minimal power from the supplied adapter and runs silently because it has no moving parts. Heat output is negligible during normal use, so it can sit in a confined AV rack without affecting nearby equipment.
Fixed Output Resolutions Under Continuous Use
Supported VGA output modes are 800 x 600 at 60 Hz and 75 Hz, 1024 x 768 at 60 Hz and 1280 x 1024. The scaler maintains these resolutions steadily during extended sessions, and OSD settings for brightness, contrast, saturation and hue are retained after power loss.
How it compares
Measured against everything we stock in S-Video & Mini-DIN Cables, at today’s prices. Recalculated every night.
- Price $22.99
- Cheaper than about 92% of the 1,035 comparable items (median $59.99).
New to this? Which coin should you pay with — what to check, what it costs to pay, and what is never asked for.
Specifications
| Product | |
|---|---|
| Brand name | CORN |
| Product type | S-Video to Composite |
| Product color | Black |
| Size & build | |
| Overall length | 1 in - 5 in |
Questions about this item
How do I install the converter box, and what step is often missed?
Connect the S-video or RCA source to the input ports, attach a VGA cable from the output to your display, plug in the supplied power adapter, then press the AV/SV/VGA button to select the active input; the unit will not pass a signal until the correct source is chosen.
What maintenance or replacement will the converter need over time?
The external power adapter is the only component likely to wear out; if the status LED stops lighting or the output becomes unstable, replace the adapter with one matching the original voltage and polarity.
What limit appears first during continuous operation?
The maximum supported output resolution is 1280 x 1024, so any source above that will be downscaled or rejected, making resolution the first hard ceiling you hit.
More in S-Video & Mini-DIN Cables





