crystalsolar SW3506 3.5W 6V solar panel 165x135mm
A 3.5 W monocrystalline panel delivers 6 V at 0.58 A with 19 % conversion in a 165 × 135 mm frame
- Product typeSolar Panel
- 19% conversion rate maximises energy harvest from limited surface
- 5 W output at 6 V powers small DC devices directly
- Monocrystalline silicon cells maintain usable current in weak light
- 165 × 135 × 3 mm footprint fits tight project enclosures
- 80 g weight adds minimal load to portable or drone builds
Compact solar panel for DIY projects
The crystalsolar SW3506 is a 3.5W monocrystalline silicon module built for hobbyists assembling small off-grid systems. It suits DIY home lighting, solar-powered toys or a low-voltage water pump where a lightweight 165x135mm footprint is convenient. Buyers needing higher wattage for household appliances or grid-tie installations should look elsewhere.
Steady 6V output in real conditions
Rated at 6V and 0.58A, the panel delivers a maximum conversion rate of 19% under standard illumination. Output scales with available light, so sustained current drops under clouds or shading rather than holding the peak figure. The 580mAh working current rating reflects typical bright-day performance, not a guaranteed minimum.
Thin frameless laminate for flexible mounting
At 3mm thick and 0.080 kg, the bare cell laminate can be bonded to curved surfaces or fitted into custom enclosures without bulky brackets. No pre-drilled holes or cables are included, so the builder chooses wire gauge and termination to match the load. The exposed edges require careful handling to avoid cell cracking during installation.
How it compares
Measured against everything we stock in Solar-Powered Chargers & Devices, at today’s prices. Recalculated every night.
- Price $7.99
- Cheaper than about 92% of the 874 comparable items (median $25.99).
Specifications
| Product | |
|---|---|
| Product type | Solar Panel |
Questions about this item
How hot does the 3.5 W panel get when it sits in full sun all day?
The panel is rated at 19 % max conversion rate, so most of the incoming energy leaves as electricity rather than heat; the 3 mm thick monocrystalline silicon laminate stays close to ambient temperature in normal operation.
What do I need to connect the panel's 6 V 0.58 A output to my project?
The panel provides bare 6 V 0.58 A leads, so you must supply a charge controller, voltage regulator or direct-load device that accepts that voltage and current.
Will the 165 mm by 135 mm panel fit beside the 50 mm cooling fan I already use in my enclosure?
At 165 mm long, 135 mm wide and only 3 mm thick, the panel adds minimal footprint and can mount flat next to a 50 mm fan without blocking airflow.
More in Solar-Powered Chargers & Devices
Similar items
VALVOLINE 822345 Automatic Transmission Fluid 1 qt Red
- Automotive Fluids &…
- Red
Mobil 123130 Automatic Transmission Fluid 1 qt Red
- Automotive Fluids &…
- Red
Ruth's sister 20W Portable Solar Panel 5V Folding Waterproof USB Charger
crystalsolar 2W 12V 0.166A 136x110x3mm Polysilicon Solar Panel
- Solar Panel





