We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Compact white PoE+ injector with two Ethernet ports and blue power LED

D-Link

D-Link DPE-301GI 30 W Gigabit PoE+ Injector wireless accessory

SKU CH-0BQ1-R6FV4 MPN DPE-301GI

A single-port Gigabit PoE+ injector delivering up to 30 W over 100 m for IEEE 802.3at and 802.3af devices

  • Product typePoE Injector
  • DetailsPoE + Data Port (out): Supports half / full-duplex operation
  • Key featuresD-Link’s DPE-301GI 1-Port PoE Injector is used to provide I.
  • Powers remote devices up to 100 m with 30 W PoE+
  • Gigabit data pass-through keeps network speed at 1000 Mbps
  • IEEE 802.3at and 802.3af compliant for wide device compatibility
  • Operates reliably from 0 to 50 °C in demanding environments
  • LED indicators show power and link status at a glance

PoE+ Injector for IT Professionals

The D-Link DPE-301GI is a single-port Gigabit PoE+ injector designed for IT professionals who need to add Power over Ethernet to network segments where switches lack PoE support. It delivers up to 30 watts of power alongside data over a single Ethernet cable to compatible devices such as wireless access points or IP cameras.

Simple Plug-and-Play Installation

Installation requires connecting the injector between a non-PoE network switch and the powered device using standard Ethernet cables; no software configuration is needed. The unit operates from 0 to 50 degrees Celsius and includes LED indicators for power and link status, helping installers verify correct cabling and power delivery immediately.

30 Watt IEEE 802.3at Output Decides Suitability

The injector supplies a maximum of 30 watts at 54 volts and 0.6 amps on the PoE+ data output port, compliant with IEEE 802.3at and backward compatible with 802.3af devices. Buyers whose endpoints require more than 30 watts, such as high-power pan-tilt-zoom cameras or multi-radio access points, cannot use this injector.

How it compares

Measured against everything we stock in Patch Panels, PoE & LAN Adapters, at today’s prices. Recalculated every night.

Price $39.99
Cheaper than about 62% of the 559 comparable items (median $56.99).

Specifications

Product
Brand nameD-Link
Model nameDPE-301GI
Product typePoE Injector
Size & build
Shipping weight0.38 kg
Package size287 × 155 × 69 mm

Questions about this item

How do I confirm the DPE-301GI is powering my device correctly after connecting it?

Check that the blue Power On LED is lit and the green Link On LED shows activity on the PoE + Data output port; the injector delivers 0.6 A at 54 V for up to 30 W of PoE+ power.

What comes with the DPE-301GI and what must I supply myself?

The unit includes the 1-port PoE+ injector with its 54 V / 0.6 A power adapter; you must provide two Ethernet cables (one for the Data In port from your switch, one for the PoE + Data Out port to the powered device).

Which DPE-301GI version should I choose for a 30 W PoE+ access point 80 metres away?

This single model supplies 30 W PoE+ over Gigabit Ethernet up to 100 m (328 ft), so it covers the 80 m run without needing a different capacity or version.

More in Patch Panels, PoE & LAN Adapters

Similar items